|
| XCH45R |
|
|||
|
hey guys,
can someone tell me how to take the injectors out of my EF 4.0litre, im getting them cleaned and want to take them out myself. Do I need to disconnect the battery or anythying to reduce fuel pressure. cheers, rob |
|||
| Top | |
|||
| phongus |
|
|||
|
okay........unplug the fuel pump relay....or unplug the power straight from the fuel pump in ur boot. start the car....let it idle or let it run and the engine would stop once there is no more fuel in the fuel line. now u can remove the hose that connects to the fuel rail and then undo all the bolts that hold it down and i guess just yank them out........but i might be wrong with the undoing bolts and yanking part
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| XCH45R |
|
|||
|
so ya have to reduce the fuel pressure? or can ya just yank it apart lol
|
|||
| Top | |
|||
| simo_42 |
|
||
|
where you getting them cleaned and how much
|
||
| Top | |
||
| MARK.TANIA |
|
||
|
if i was you i would just take it to a efi specilist and get them to do it .will be more money but thay can do a test on it and get it running smooth .and also it will cost you more $ if you stuff up something.it should only cost you about $150 or so for them to do it
|
||
| Top | |
||
| XCH45R |
|
|||
|
MARK.TANIA wrote: if i was you i would just take it to a efi specilist and get them to do it .will be more money but thay can do a test on it and get it running smooth .and also it will cost you more $ if you stuff up something.it should only cost you about $150 or so for them to do it
$150? where do u go? I might ship the car over to perth for that price! lol i'm getting them done for $25 per injector, so $150 all cleaned,flow checked etc. Just concerned on pulling them out myself and wanting to know whether I have to reduce fuel pressure, or can I just rip them out myself? Rob |
|||
| Top | |
|||
| Gaz |
|
||
|
well, the way i see it.
do you want just a little bit of fuel to leak out, or do you want a lot to leak out ? you could just rip them out, just watch out for a hot engine and ur face etc. but its so easy to depressureise, why not do it. takes 30 seconds.
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| XCH45R |
|
|||
|
true true gaz, so ya just d/c the fuel pump relay?
|
|||
| Top | |
|||
| phongus |
|
|||
|
XCH45R wrote: true true gaz, so ya just d/c the fuel pump relay?
yeah and then start the car so that the rest of the petrol in the fuel line is used up and thus no more pressure =D but u know take with u a cloth just to make sure there might be a tiny amount of petrol coming out. have fun and good luck getting them out =D. btw 150 bux to get hem cleaned is pretty cheap i say. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| madmax |
|
|||
|
XCH45R wrote: MARK.TANIA wrote: if i was you i would just take it to a efi specilist and get them to do it .will be more money but thay can do a test on it and get it running smooth .and also it will cost you more $ if you stuff up something.it should only cost you about $150 or so for them to do it $150? where do u go? I might ship the car over to perth for that price! lol i'm getting them done for $25 per injector, so $150 all cleaned,flow checked etc. Just concerned on pulling them out myself and wanting to know whether I have to reduce fuel pressure, or can I just rip them out myself? Rob I just rip them out. On a cold engine.
_________________
|
|||
| Top | |
|||
| XCH45R |
|
|||
|
yeah done the same, just ripped em out. was all fine
|
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
i got done for 150 because the bloke that done mine was a mate and he owed me a favour i for got to say that it is about 280 to do sorry
|
||
| Top | |
||
| MARK.TANIA |
|
||
|
be for you put them back in put a bit of oil on the new orings so that thay seat in better
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Cooperschool2005 and 30 guests |
