|
| mrghia |
|
|||
|
hello to all I have a ltd on gas bottom end is still good with new heads. dizzy has no vacume advance so thinking of new one, just wondering if any one has tried the HEI dizzy's ? also thinking of replacing the cam and putting in timing gears if anyone has got any ideas. heads have 130lbs valve spings and running C4 stage 2 shift not to familuar with brand or tech stuff as this is my first real v8. thanks any info greatly appreciated
cheers lou Last edited by mrghia on Sun Jul 23, 2006 2:29 pm, edited 1 time in total. |
|||
| Top | |
|||
| XR9UTE |
|
||
|
What block have you got mrghia?
Pete. |
||
| Top | |
||
| mrghia |
|
|||
|
the block is the original 351 and is stock as far as i know or did you mean some thing different?
|
|||
| Top | |
|||
| xf_man |
|
|||
Age: 46 Posts: 624 Joined: 21st Mar 2005 Ride: Triton ute BA Futura Location: Woori Yallock |
If you can post the engine stamp on the block
|
|||
| Top | |
|||
| Walker |
|
|||
|
If it's original it will be a blue motor.
|
|||
| Top | |
|||
| xf_man |
|
|||
Age: 46 Posts: 624 Joined: 21st Mar 2005 Ride: Triton ute BA Futura Location: Woori Yallock |
blue block or black block?
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
I wanted to know the block type because of the distributor pilot size. Late XD-XE blocks have a smaller pilot hole(the hole in the block below the distributor gear) therefore you can't use a late electronic distributor from the XD-XE engine in your early block.
In your case you would need to go with an aftermarket electronic unit with vacuum advance type...Crane,Accell,MSD, Scorcher etc etc. Don't touch cheap rubbish like procomp. Pete. |
||
| Top | |
||
| Walker |
|
|||
|
I ran a blue block in my XD with XD dizzy, but i got an electronic dizzy (Remote module type) from an XC and got the shaft fitted to the XD dizzy to stop it floating.
Although i did run the std XD shaft in the blue block for a cpl of years without any probs. Black block shaft is 500 thou, Blue is 530 thou. |
|||
| Top | |
|||
| mrghia |
|
|||
|
the motor is a blue block with electronic ingnition
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
What sort of electronic ignition?
|
||
| Top | |
||
| mrghia |
|
|||
|
dunno its my dads car will find out. but think its the basic one
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
{USERNAME} wrote: dunno its my dads car will find out. but think its the basic one
ahhh riiight the basic one. Does it have a remote module mounted in the engine bay with cooling fins and a transistor? If so this in the XC type electronic ignition...it's like the XD-E one but with a remote module. These are good so I wouldn't bother buying anything else unless you wanted multiple spark. A Crane Hi-6 or MSD brand multi-spark unit will work with the stock electronic dizzy. You should be able to find another stock dizzy with vac advance on it and either fit it to yours or use it complete. Pete. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
