|
| andrewsfutura |
|
|||
|
My car has been changed to a 5 speed using the malwood pin adaptor on the normal auto pedal box. Its really hard to push the lever into 1st always and is quite notchy when changing gears. I have a SVO rip shift on it as well.
The cable has been checked as i thought it was stretching. A new one was installed and the same thing is still happening, every week it needs adjusting until theres hardly any screw thread left of the cable poking through the firewall!! Any suggestions of what the problem could be? its been suggested that the clutch fork may be bent inside the bell housing. any help would be good because i need it fixed soon as the new cable near the end point of adjustment
_________________ The boogieman checks under his bed for chuck norris |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
it hasnt bent the pedal box at all?
-mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| Walker |
|
|||
|
My EF did the same s**t Andrew, it always went out of adjustment.
Check the firewall and make sure it's not split or flexing too much when you push the clutch in, check the hook that goes into the fork that the clutch cable hooks onto (Mine slowly bent itself straight). Mine also split the parts at the pedal end where the cable hooks into. Over time i replaced everything except the fork, it's all made out of s**t and prone to crack or break. |
|||
| Top | |
|||
| Rapier |
|
||
|
yeah mine 2 andrew the malwood pin on mine chewed right through the pedal box causing it to be way out of adjustment
|
||
| Top | |
||
| Walker |
|
|||
|
No s**t Tim? Those pins were supposed to be spot on!
My pedal box collapsed about 5 or 6 years ago, i took it out and re-welded and strengthened it, it's still going now. For anyone fitting a whole pedal box, get the mig out and throw more into the weak spots. |
|||
| Top | |
|||
| wicksy |
|
|||
|
i snapped my clutch cable today lol
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| andrewsfutura |
|
|||
|
THANKS WALKER. the clutch return spring is fine and the firewall is fine too. the pedal box isnt bent but the clutch pedal is SLIGHTLY bent. so how come the cable keeps pulling back? i understand if the fork is bent, but its like its keeps pulling the clutch unitl theres nothing left? shouldnt it stop a a certain point otherwise the cable will fall out of the firewall? LOL
_________________ The boogieman checks under his bed for chuck norris |
|||
| Top | |
|||
| andrewsfutura |
|
|||
|
hey tim, so your pin f**k up as well huh? so what did you do to fix the f**k thing?? im sick of adjusting the cluthc all the time.
_________________ The boogieman checks under his bed for chuck norris |
|||
| Top | |
|||
| Rapier |
|
||||||
|
nah my pin was fine ill attach some pics of what it did. i had same problem my clutch was on an angle i originally thought the pedal was bent.
|
||||||
| Top | |
||||||
| Walker |
|
|||
|
Same s**t happens on the original boxes, the pin is fine, but the pedal box can't handle the pressure.
I'd have to actually see it Andrew. The small bush on the end of the fork isn't flexing back when you push the clutch in? Mine slowly did, till it bent itself back straight and the cable jumped off it... they're not expensive and pretty easy to change. |
|||
| Top | |
|||
| conners |
|
||
|
wicksy wrote: i snapped my clutch cable today lol
i snapped mine yesterday too. i got no idea how much its gunna cost to fix though. u got any ideas?? |
||
| Top | |
||
| andrewsfutura |
|
|||
|
Thanks for the photos tim. Im on my second pedal box at the moment. because the exact same thing happedned to my 1st one as your pics show...it just sheered right through the metal. I'll have to check the fork you mentioned walker.
_________________ The boogieman checks under his bed for chuck norris |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 76 guests |
