Fordmods Logo

Militec-1 

 

Page 2 of 2 [ 30 posts ] Go to page Previous  1, 2

 
Posted: Thu Dec 30, 2004 3:50 pm 
Parts Gopher
Offline
User avatar

Posts: 75

Joined: 2nd Dec 2004

Gallery: 8 images

Location: Woodlands
WA, Australia

Nice questions dude, its feedback like that that makes great inventions come to life : )

The pressure switch would be similar to those in the Ea and pov-pack falcons, with a pressure activated on off function, below set level is on, and above is off, similar to the pressure warning light’s, but with a relay to active pump.
As for monitoring via a gauge, I would assume that would be the optimum way to go, or perhaps have a sender set to activate a light when pressure has been reached.
I already have a separate analogue pressure gauge so that would be the easiest way to go, ill be doing it this weekend hopefully so ill address any issues I find during installation in the write-up.

With the 555 timer you pretty much have it spot on,
“Are you doing so for when it does reach the OFF pressure it will still flow for X time, giving you enough time to crank the engine without worrying if the pump has stopped or not? “
I may or may not implement this, because as soon as you crank the engine the standard oil pump will be working as usual, so its not necessary for the electric one to operate.

As far as the worst case scenario, I would only use one oil filter, in a remote location after the electric pump, ,,, it would also be very easy to run an engine oil cooler in front of the radiator also to maintain optimum oil viscosity.
Because the electric oil pump can free-flow when no current is applied, it will not interrupt normal operation when its not active, and if the oil pressure drops below said level at lights etc, it would only reduce pressure on the mechanical pump, and increase engine pressure up to the specified level, maintaining a correct pressure at all rpm’s.

feedback is apreceated, ill keep you all up to date on how it goes :)

- Sketch

 

_________________

i miss you scotty, u goddamn goose!

Top
 Profile  
 
 
Posted: Sat Jan 01, 2005 9:10 am 
Parts Gopher
Offline
User avatar

Age: 49

Posts: 88

Joined: 9th Nov 2004

Gallery: 3 images

Ride: AU XR8

Location: IPSWICH
QLD, Australia

No worries Mr Futura, we all have days like that. Lets just agree to the fact that Castrol "MAGNATEC", does none of what it claims, and from what we can gather, is a s***ty oil anyway :)

 

_________________

a glass half empty = a glass half full,
2 halves = a whole,
therefore, a glass empty = a glass full

My Dream CAR is the TVR Tuscan Speed 6
Check it out at : http://www.tvr-eng.co.uk

Top
 Profile  
 
 
Posted: Sun Jan 02, 2005 1:35 pm 
Parts Gopher
Offline
User avatar

Posts: 75

Joined: 2nd Dec 2004

Gallery: 8 images

Location: Woodlands
WA, Australia

redline racing oil on the otehr hand,, mmmmmmmmmm

3-6 Hpand many otehr benifits,,, NOT off their website....


frank, you run waterwetter dont ya,,, man i love redline

 

_________________

i miss you scotty, u goddamn goose!

Top
 Profile  
 
 
Posted: Mon Jan 03, 2005 10:39 am 
Getting Side Ways
Offline
User avatar

Age: 54

Posts: 1826

Joined: 6th Nov 2004

Gallery: 3 images

Ride: 1997 Falcon EL Gli/Sleeper

Location: Bayside, Brisbane
QLD, Australia

{USERNAME} wrote:
No worries Mr Futura, we all have days like that. Lets just agree to the fact that Castrol "MAGNATEC", does none of what it claims, and from what we can gather, is a s***ty oil anyway :)


Yes we can all agree on this :D :D

 

_________________

" In life their is never an Obligation just an Opportunity to..Own an awesome 1970 Ford Mach 1 Mustang! "

Top
 Profile  
 
 
Posted: Mon Jan 03, 2005 2:16 pm 
Smokin em up
Offline

Age: 52

Posts: 206

Joined: 5th Nov 2004

Gallery: 3 images

Ride: 2004 BA Falcon MkII

Location: Manjimup
WA, Australia

{USERNAME} wrote:
Nice questions dude, its feedback like that that makes great inventions come to life : )

The pressure switch would be similar to those in the Ea and pov-pack falcons, with a pressure activated on off function, below set level is on, and above is off, similar to the pressure warning light’s, but with a relay to active pump.
As for monitoring via a gauge, I would assume that would be the optimum way to go, or perhaps have a sender set to activate a light when pressure has been reached.
I already have a separate analogue pressure gauge so that would be the easiest way to go, ill be doing it this weekend hopefully so ill address any issues I find during installation in the write-up.

With the 555 timer you pretty much have it spot on,
“Are you doing so for when it does reach the OFF pressure it will still flow for X time, giving you enough time to crank the engine without worrying if the pump has stopped or not? “
I may or may not implement this, because as soon as you crank the engine the standard oil pump will be working as usual, so its not necessary for the electric one to operate.

As far as the worst case scenario, I would only use one oil filter, in a remote location after the electric pump, ,,, it would also be very easy to run an engine oil cooler in front of the radiator also to maintain optimum oil viscosity.
Because the electric oil pump can free-flow when no current is applied, it will not interrupt normal operation when its not active, and if the oil pressure drops below said level at lights etc, it would only reduce pressure on the mechanical pump, and increase engine pressure up to the specified level, maintaining a correct pressure at all rpm’s.

feedback is apreceated, ill keep you all up to date on how it goes :)

- Sketch


A further question for you. You will take the oil pickup for the electric pump from the base of the sump, right?

Obviously, you can't take it from through the mechanical pump, as it isn't spinning and therefore there would be zero oil flow.

 

_________________

Kel.
BHR
A/MD 1272
240 inch Dragster
466 Big Block Ford
650hp
8.40 @ 156mph (251kph)

Top
 Profile  
 
 
Posted: Mon Jan 03, 2005 2:20 pm 
Smokin em up
Offline

Age: 52

Posts: 206

Joined: 5th Nov 2004

Gallery: 3 images

Ride: 2004 BA Falcon MkII

Location: Manjimup
WA, Australia

{USERNAME} wrote:
I think that kind of stuff is available innit? I imagine this is how a dry sump would operate.


Actually dry sump systems use multi chamber belt driven pumps. That is they have three or for pumps in one unit.

Typically two chambers are used for sump scavanging purposes. One chamber is used to feed the motor. And if there is a fourth chamber (V8 supercar teams use 4), it is most often used as a crank case vacuum pump.

 

_________________

Kel.
BHR
A/MD 1272
240 inch Dragster
466 Big Block Ford
650hp
8.40 @ 156mph (251kph)

Top
 Profile  
 
 
 Post subject: Re: Militec-1
Posted: Mon Jan 03, 2005 2:23 pm 
Smokin em up
Offline

Age: 52

Posts: 206

Joined: 5th Nov 2004

Gallery: 3 images

Ride: 2004 BA Falcon MkII

Location: Manjimup
WA, Australia

{USERNAME} wrote:
Spotted the add for this in a magazine and are wondering if anyone has used or heard of it before.
The website for it is www.frictech.com


While I have no experience with Militec, I have heard good reports from other drag racers who have used it.

 

_________________

Kel.
BHR
A/MD 1272
240 inch Dragster
466 Big Block Ford
650hp
8.40 @ 156mph (251kph)

Top
 Profile  
 
 
Posted: Mon Jan 03, 2005 8:29 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

{USERNAME} wrote:
*thinks* i know what im doin this weekend,,,,, remote oil filter,,,, with an electric pil pump, similar to dry sump,,,,
but on a 555Timer on the oil pressure sender,,,, ill do a tech writeup when ive done it, but itll basicly be ,,,

when teh ignition is on, and the oil pressure is below a set limit, teh oil will be pumped through the galley's by the pump, then when pressure is up, i.e engine running,,, the pump will freeflow as normal.....


mm weekend over... so is it done?

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Wed Jan 05, 2005 9:33 pm 
Parts Gopher
Offline
User avatar

Age: 49

Posts: 88

Joined: 9th Nov 2004

Gallery: 3 images

Ride: AU XR8

Location: IPSWICH
QLD, Australia

A friend of mine, who has been in to racing in the past, recommended that I use Penrite, he seems to think it is one of the best oils, what would you guys say ?

 

_________________

a glass half empty = a glass half full,
2 halves = a whole,
therefore, a glass empty = a glass full

My Dream CAR is the TVR Tuscan Speed 6
Check it out at : http://www.tvr-eng.co.uk

Top
 Profile  
 
 
Posted: Wed Jan 05, 2005 9:53 pm 
Smokin em up
Offline

Age: 52

Posts: 206

Joined: 5th Nov 2004

Gallery: 3 images

Ride: 2004 BA Falcon MkII

Location: Manjimup
WA, Australia

We use Penrite and several other drag racers I know use Penrite too. I haven't spoken to any others about what they use.

We buy HPR50 in 20 litre drums.

 

_________________

Kel.
BHR
A/MD 1272
240 inch Dragster
466 Big Block Ford
650hp
8.40 @ 156mph (251kph)

Last edited by Epitome on Thu Jan 06, 2005 9:20 pm, edited 1 time in total.

Top
 Profile  
 
 
Posted: Thu Jan 06, 2005 12:53 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

{USERNAME} wrote:
A friend of mine, who has been in to racing in the past, recommended that I use Penrite, he seems to think it is one of the best oils, what would you guys say ?


PENRITE IS THE s**t i run penrite engine oil, trans oil and theire super think blue lsd oil!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Fri Jan 07, 2005 12:31 am 
Parts Gopher
Offline
User avatar

Posts: 75

Joined: 2nd Dec 2004

Gallery: 8 images

Location: Woodlands
WA, Australia

Quote:
A further question for you. You will take the oil pickup for the electric pump from the base of the sump, right?


taking it from the sump drain plug with a screw in hose fitting.


havent done it yet as mates cars died and had to fix em
my weekend was spent

replacing the timing cover and waterpump on a Eb302
fitting a cam on an i6
fitting 3 thermofans
and fising ignition probs on 2 of my mates cars,,,

didnt get aorund to doin my own stuff,, although i did convert from the dodgy AU thermo's to a sweet 16" volvo one,, mmm cooling..

 

_________________

i miss you scotty, u goddamn goose!

Top
 Profile  
 
 
Posted: Fri Jan 07, 2005 3:09 pm 
Parts Gopher
Offline
User avatar

Age: 49

Posts: 88

Joined: 9th Nov 2004

Gallery: 3 images

Ride: AU XR8

Location: IPSWICH
QLD, Australia

Cool, thanx for the advice guys.
I think I'll start using Penrite. The previous owner was using Mobil I think.

 

_________________

a glass half empty = a glass half full,
2 halves = a whole,
therefore, a glass empty = a glass full

My Dream CAR is the TVR Tuscan Speed 6
Check it out at : http://www.tvr-eng.co.uk

Top
 Profile  
 
 
Posted: Fri Jan 07, 2005 11:30 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

{USERNAME} wrote:
Cool, thanx for the advice guys.
I think I'll start using Penrite. The previous owner was using Mobil I think.
ohh if he was using mobil 1 from at least 40thou kays kepp using mobile 1
it is actually very very damn good oil expensive yes but if the engine has had it since under 40thousand kays it worth it it actually stops alot of wear!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sat Jan 08, 2005 11:34 pm 
Parts Gopher
Offline
User avatar

Age: 49

Posts: 88

Joined: 9th Nov 2004

Gallery: 3 images

Ride: AU XR8

Location: IPSWICH
QLD, Australia

I'm getting the car tuned by an expert here in Brisbane, I'll see what he says, I'm not sure if the car has run Mobil 1 since under 40 thousand, because I am the third owner, I'm sure my mechanic can tell me.
Thanks for that advice Disco Frank :)

 

_________________

a glass half empty = a glass half full,
2 halves = a whole,
therefore, a glass empty = a glass full

My Dream CAR is the TVR Tuscan Speed 6
Check it out at : http://www.tvr-eng.co.uk

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 30 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 22, 2024 11:33 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names