Fordmods Logo

au question 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: au question
Posted: Tue Aug 22, 2006 9:53 pm 
Stock as a Rock
Offline

Age: 46

Posts: 175

Joined: 6th Jun 2005

Ride: el falcon

Location: Brisbane
QLD, Australia

what is the amperage rating for an au alternator mitsubishi alternator especially if there is any difference?
Top
 Profile  
 
 
Posted: Tue Aug 22, 2006 9:53 pm 
Stock as a Rock
Offline

Age: 46

Posts: 175

Joined: 6th Jun 2005

Ride: el falcon

Location: Brisbane
QLD, Australia

ef is 110 el is 100
Top
 Profile  
 
 
Posted: Tue Aug 22, 2006 10:53 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

au wont bolt onto ef/el.
ef is 110 au is also 110.
i have adapted internals off an au alternator to my ef casing.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Tue Aug 22, 2006 11:03 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

AU is 110 + iirc

 

_________________

RIP SCOTT

Top
 Profile  
 
 
 Post subject: would it make any difference
Posted: Wed Aug 23, 2006 1:26 pm 
Stock as a Rock
Offline

Age: 46

Posts: 175

Joined: 6th Jun 2005

Ride: el falcon

Location: Brisbane
QLD, Australia

i am running an au engine in my el, my question is whether or not i need to upgrade my relay which is 100 amps for it to operater properly?
Top
 Profile  
 
 
Posted: Wed Aug 23, 2006 5:57 pm 
Smokin em up
Offline

Age: 47

Posts: 227

Joined: 21st Jun 2005

Location: Melbourne: Thornbury
VIC, Australia

smoke_rubber wrote:
au wont bolt onto ef/el.


Can i ask a dumb question....why?

I have an EF alternator and bracket left over and was just looking at an AU long motor minus a few accessories and had until now assumed that it would have fitted....is it just a bracket issue?

 

_________________

EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors).

Top
 Profile  
 
 
Posted: Wed Aug 23, 2006 7:00 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

yes it's a bracket issue.
if you have a look, you will see the difference, it's pretty obvious so you won't miss it.
the stator is also 6mm or so thicker than ef/el so a spacer must be made up if you wish to change internals.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Wed Aug 23, 2006 11:10 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

smoke_rubber wrote:
yes it's a bracket issue.
if you have a look, you will see the difference, it's pretty obvious so you won't miss it.
the stator is also 6mm or so thicker than ef/el so a spacer must be made up if you wish to change internals.


pretty sure u can put the AU internals into the ef/el body

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Thu Aug 24, 2006 7:42 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

yes you can, i've done it, but you need the spacer.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Thu Aug 24, 2006 9:55 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

smoke_rubber wrote:
yes you can, i've done it, but you need the spacer.


ahh cheers
will remember that

 

_________________

RIP SCOTT

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 74 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 11:31 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names