|
| daro |
|
|||
|
I need a bit of advice out there in regards to what size socket is needed to remove the bolt that holds the harmonic balancer on the I6.
I know I have to remove the radiator, fan shroud & fan-clutch assembly to gain access to the the bolt & then use a gear puller to pull off the old balancer. I just need to know what size socket I will need to loosen the bolt. Thanks in advance.
_________________ I drive & I vote....Scrap the fuel excise now.
|
|||
| Top | |
|||
| The Dog |
|
|||
|
From memory ? it is a 21 or a 24mm
 .........but my memory is not that good 
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| nick81xd |
|
||
|
24mm
|
||
| Top | |
||
| arm79 |
|
|||
|
22mm
|
|||
| Top | |
|||
| tjb45 |
|
|||
|
well I'm putting my money on it been 21mm, but I would also back 22mm, carn't quite remember..
|
|||
| Top | |
|||
| arm79 |
|
|||
|
Considering I've just walked in from rebuilding a motor in the garage, I can definately say its 22mm.
|
|||
| Top | |
|||
| samftr |
|
|||
|
my ea and my ef are both 22 mm as arm79 said.
double check with a set of verniers mate 
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| Jaysen |
|
|||
|
Yup 22mm, its one of my worn sockets from turning engines over when doing cam installs
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| concorde |
|
|||
|
if you need to ask these questions you probably shouldn't be doing the work yourself. go to a shop and ask to try one on the bolt itself because i have found that different brands of sockets fit very different. more expensive sets fit alot better.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| stomper |
|
|||
|
Im sure its 22 too. I think the commonwhores are 24mm
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
lock in 22 eddie!
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| daro |
|
|||
|
Ok thanks for the info, Now I can lay my hands on the tools that I will need to do the job.
_________________ I drive & I vote....Scrap the fuel excise now.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 100 guests |
