|
| TerroristGHIA |
|
|||
|
Am about to buy a set of AFR 185 heads, will these mate up to my lukey extractors, and will these fit the RPM performerII intake manifold. ANy thoughts would be good
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Yep they bolt up .But you'll need to notch the pistons for piston to valve clearance....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| MrLandau |
|
|||
|
There are some pics of the AFR 185's on my website if you want a look at their quality - just follow the www button bellow - and go to the 347 stroker buildup section
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| mugen |
|
||
|
{USERNAME} wrote: There are some pics of the AFR 185's on my website if you want a look at their quality - just follow the www button bellow - and go to the 347 stroker buildup section hey nice heads Shane...if you dont mind me asking ..what did you pay for them...
Shane |
||
| Top | |
||
| MrLandau |
|
|||
|
I paid just under $3000 landed with import duties and taxes.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
thanks for the help guys, why do you need to notch the pistons< and how is that done
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
{USERNAME} wrote: thanks for the help guys, why do you need to notch the pistons< and how is that done
Because the 185's run bigger inlet valves and the notch in std piston is too small, plus the chamber height of AFR's are lower than other brands...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XR8Chic |
|
|||
|
Yeah - what he said..
Dummy speak - he made the little half moon cutouts on the top of the pistons bigger. My engine builder notched mine with a special tool he bought. He did it with the engine in the car.
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| MrLandau |
|
|||
|
The other thing you need to do is make sure you have .100" clearance between the valve and the piston to make up for rod stretch and piston growth. The AFR heads (especially the 185's) are still flowing their high numbers at .650" lift which means to get the most out of them - you need a fairly big lift cam (most hot hydraulic rollers are around .550" lift). I am going to try the competition cams XE282HR on mine with 1.7 rockers to see if I can get the lift up to .612".
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 48 guests |
