4 sale alpine amp FLEX4 MODEL MRF-F256 OK COND OFFERS INVITED

SUB W.
(80Hz)
FRONT
REAR
L R L R
SPEAKER LEVEL INPUT
DC-DC 4+1 CHANNEL
POWER AMPLIFIER
MRP-F256

Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz)
Per channel into 4 ohms
25W
25W
30W
0.08% THD
Per channel into 2 ohms
35W
35W
50W
0.3% THD
Bridged into 4 ohms
70W
70W
100W
80W
(Subwoofer, 20 to 200 Hz)
0.3% THD
Max. Power Output (at 14.4V, 1 kHz)
Per channel into 4 ohms
40W
40W
60W
10%THD
Bridged into 4 ohms
140W
(Subwoofer, 20 to 200 Hz)
10%THD
Frequency Response
10 Hz to 50 kHz
(+0, –1 dB)
Signal-to-Noise Ratio
100 dB
(referenced to rated power)
Slew factor
Greater than 5
Input Sensitivity (for rated power
output)
200mV to 4.0V (1.0V at center detent)
Input Impedance
Line in:10k ohms/Speaker in: 15 ohms
Speaker Impedance
4 or 2 ohms (Stereo), 4 ohms (Bridged)
Active Dividing Network
Frequency and Slope
80 Hz, 18 dB per octave
(Subwoofer: 50 to 200 Hz)
Power Requirement
11 – 16VDC Negative Ground
Dimensions (W x H x D)

MRP-F256 ................................ 226mm x 35mm x 230mm (8-7/8" x 1-3/8" x 9")

MRP-F256 .................................................................................2.6 kg (5 lbs. 12 oz)

MRP-F256 ................................................................................. 226mm x 35mm x 230mm (8-7/8" x 1-3/8" x 9")
MRP-F256 ................................................................226mm x 35mm x 230mm

 

 

Attachments:

fordmods.jpg [ 19.43 KiB | Viewed 198 times ]

Last edited by a1drake on Wed Sep 13, 2006 4:42 am, edited 1 time in total.

i think you need to review your specs, how can it be bridged and retain the same number of channels?

smartass but its sold