|
| phat-ED |
|
|||
Age: 37 Posts: 341 Joined: 29th Jul 2005 Ride: NL Fairlane Ghia Location: Geelong, Victoria |
hi all
i just got a 3:45 LSD installed and now my speedo is 15khs below the speed my gauge is sitting on, im just wondering if that usually happens, how much it will cost to fix and somewhere in geelong that could do it Cheers Daniel
_________________
|
|||
| Top | |
|||
| Krytox |
|
|||
|
you can buy speedo gears new from fraud, they're like 10-15bux
you need an XR one or just state 3.45:1 and they'll fetch it you can get the the speedo gear thats on the box itself if you ramp the car on the gutter and crawl underneath with your 10mm spanner and pulley
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Chevy38 |
|
||
|
How much did just the diff cost
|
||
| Top | |
||
| phat-ED |
|
|||
Age: 37 Posts: 341 Joined: 29th Jul 2005 Ride: NL Fairlane Ghia Location: Geelong, Victoria |
$400 installed, it came from an EL xr6 with around 150,000khs on it
_________________
|
|||
| Top | |
|||
| phat-ED |
|
|||
Age: 37 Posts: 341 Joined: 29th Jul 2005 Ride: NL Fairlane Ghia Location: Geelong, Victoria |
it was $300 just for the diff
_________________
|
|||
| Top | |
|||
| AXR88U |
|
|||
|
Correcting your speedo will make your car rev out more before shifting.
The shift pattern is based on the speedo readings (not rpm). 
_________________ ________________________________________
|
|||
| Top | |
|||
| axearmor |
|
|||
|
AXR88U wrote: The shift pattern is based on the speedo readings (not rpm). Really? That sounds weird |
|||
| Top | |
|||
| smiley235 |
|
|||
|
well I don't know how relevant this might be but if I were to change the diff ratio in my BA, I need a capa edit to change the top speed shift points (or something like that from memory).
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| phat-ED |
|
|||
Age: 37 Posts: 341 Joined: 29th Jul 2005 Ride: NL Fairlane Ghia Location: Geelong, Victoria |
Quote: Correcting your speedo will make your car rev out more before shifting.
The shift pattern is based on the speedo readings (not rpm). i dont kno to much about all this but is that a bad thing or a good thing?
_________________
|
|||
| Top | |
|||
| kraddy |
|
|||
|
phat-ED wrote: $400 installed, it came from an EL xr6 with around 150,000khs on it
Where from? |
|||
| Top | |
|||
| Chevy38 |
|
||
|
Do u notice much of a difference with LSD, and how come the revs change wen u adjust the speedo
|
||
| Top | |
||
| Steady ED |
|
|||
|
phat-ED wrote: AUXR88U wrote: Correcting your speedo will make your car rev out more before shifting. The shift pattern is based on the speedo readings (not rpm). i dont kno to much about all this but is that a bad thing or a good thing? Well you got three choices. Leave it, have speedo reading wrong but auto shifting at the right times. Change sender gear, have speedo reading right, but auto shifting later at WOT (To the point where you may have to 'lift off' throttle to force it to shift) Change sender gear, fit XR ECU, speedo reads right, auto shifts correctly for diff ratio.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Gaz |
|
||
|
as said above.
the shift points will be about 650 rpm out. this *could* mean under WOT you may hit the revlimiter before it changes.
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| phat-ED |
|
|||
Age: 37 Posts: 341 Joined: 29th Jul 2005 Ride: NL Fairlane Ghia Location: Geelong, Victoria |
Quote: Change sender gear, fit XR ECU, speedo reads right, auto shifts correctly for diff ratio. how muchw ould that cost? and is it hard to fit myself? Quote: Where from?
Beck motors in geelong
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 105 guests |
