|
| yobboford |
|
|||
|
smoke rubber, its an eb xr8 auto, series 1.
_________________ Thanks to Crescent Motors, Liverpool. |
|||
| Top | |
|||
| smoke_ |
|
|||
|
{USERNAME} wrote: smoke rubber, its an eb xr8 auto, series 1.
cool
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Guest |
|
|
|
|
mods as per my signature. i ran a 15.2 at 147 kph. i think my exhaust is s**t and thats why im running s**t a** times i can hear her choking when im flooring it, i would expect to be in the 14's the amount of cash i spent. in two weeks im getting a high stall so that should fix the problem.
e6 |
|
| Top | ||
| evil6 |
|
|||
|
thats me above
forgot to login
_________________ looking for a decent 351 and wondering how im gonna get it set up in my AU???? |
|||
| Top | |
|||
| eed-250 |
|
||
|
15.5@141kmh. 25 degrees OAT, half a tank of juice, no spare wheel and no airfilter...(15.7 with spare wheel and filter)
94 ED, I6, 230,000kms, 5spd, 2.5inch exhaust, extractors, k&n filter. Since then ive added a volvo thermofan and taken off the whole towbar. Car wieghs in at 1560kgs with 1/8 tank of fuel. Cant be bothered going down again until the wade cam is in. |
||
| Top | |
||
| EAshayne |
|
||
|
1989 EA spack.
230,000kms pod filter exhaust extractors 5speed 2.92 diff with minispool running a cold air through headlight volvo thermo 14.8@150kmh snapped axle on second run. so only got 1 time. got new 28spline diff with 3.23 gears + spool should run a 14.6 with a better launch and EF injectors. mods to come are stage 3 cam and 3.9 gears. Hopefully a low 14.
_________________ EA S |
||
| Top | |
||
| voxace |
|
|||
|
Wow, thats heaps good EAshayne!
|
|||
| Top | |
|||
| Smackdown |
|
|||
|
EF Manual, currently running K&N pod, mandrel bent 3" intake, 235s soft compound. About to install stage 3 crow cam, torque chip and extractors and 2 1/2" exhaust. Whats a realistic time that I could hope for and what diff would I have? EF 5 speed manual.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| Hyena |
|
|||
|
So it's basically stock apart from the intake ? Probably 15.7 at a guess, depending on how you get off the line.
_________________
|
|||
| Top | |
|||
| eed-250 |
|
||
|
{USERNAME} wrote: EF Manual, currently running K&N pod, mandrel bent 3" intake, 235s soft compound. About to install stage 3 crow cam, torque chip and extractors and 2 1/2" exhaust. Whats a realistic time that I could hope for and what diff would I have? EF 5 speed manual.
without the cam ur looking at a 15.2-15.6 if u can get some good traction. with the cam possible high 14 - 15 flat. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
12.06@120MPH
