Hey guys, Nearly done with the install of the Trip Computer, Got hold of a couple of old wiring looms pretty cheap. I have a few bits and pieces left over.

a. Boot Release and Fuel Cap Release with about 10cm of wire

b. Rear Demister and other loom only with short amount of wire (no clock/trip comp loom on this one)

c. Two other looms that at this stage I am unsure of what they are for, will try and find out tomorrow while the dash is out

d. Finally I have the plugs from the left and right hand side of the dash cluster. Both are only good for hacking up and pulling the little pins out (excellent to use for installing a trip comp)

If anyone is interested in this gear i can send it out to you, obviously want to keep postage as cheap as possible. If you only want the little plugs for the trip comp install, I am sure I can spend some time seperating them for you. ( You only need 4 plugs for this install)

Cheers guys

I would really appreciate the pins and wire required to do the trip computer mod. The wrecker close to me wasn't much help! Please email willpalmer@ozemail.com.au with your contact details. Thanks.

Guys, one of the other looms is the loom for the doorlocks button on the dash.