|
| ED911 |
|
|||
|
nah not that hard to get a hold of can put you in contact with a couple of ppl that supply them if ya want. Not expensive either for instance you can get a set of 18" wires with tyres for $2250, or keep it old school with 13's for around the $1200 mark.....
Or even go 22's for around $4,000-$4,500 
_________________ Looking for EF/EL Falcon/Futura/XR6/XR8/Fairy.
|
|||
| Top | |
|||
| MadMax19 |
|
||||
|
Thanks guys , finally got a set of second hand 18's , but they are AU , so i am going to have to use 25mm bolt on adaptors , but here is a photo of the rear end...
Will post a pic of the whole car when they are all finally bolted on..
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||||
| Top | |
||||
| MadMax19 |
|
||
|
Rmyers wrote: Was that 3 days inculding the door jams?? It's taken me almost 5 to do the jams on my car :/ Nah , I cheated on the door jams... I am going to go back and paint them at a later date with a smaller aerosol spray pack... the local paint guys can mix directly into the cans for me... bit more expensive , but a hell of a lot easier in small spaces like that... especially if you dont pull out the interior like i didn't. The only real way to do it , is to remove the doors.
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| MadMax19 |
|
||
|
TwinturboBMX wrote: Bloody hell mate, that looks amazing.
Give us newcastle members a yell when your heading to the foreshore and we could organise a group cruise meet and greet type event. Yeah BMX , Very keen to get to the foreshore soon... Will let you know... I should have the old girl in a fit state of roadworthiness in about a week or so... Been drivin around with bits missing for weeks now , but got pulled over the other day... so gotta be a good fella now... hahahaha Bloody Cop was in a Commodore , of course... But he was diggin the ride...
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| fordfreak ef |
|
|||
|
MadMax19 wrote: Thanks guys , finally got a set of second hand 18's , but they are AU , so i am going to have to use 25mm bolt on adaptors , but here is a photo of the rear end... whoa dude! sweet colour choice... lovin it!
Will post a pic of the whole car when they are all finally bolted on.. |
|||
| Top | |
|||
| EB92 |
|
|||
|
Looking good Max...well done.
|
|||
| Top | |
|||
| doofus |
|
|||
|
Looks sweet mate!
Had one living across the road from me. This one was silver, dumped on BA XR's (i think or could be GT's) and also had a side skirt. Looked really good! Good tint on it also. Thought about getting a side skirt for it? Just an idea 
_________________
|
|||
| Top | |
|||
| MadMax19 |
|
||
|
doofus wrote: Looks sweet mate!
Had one living across the road from me. This one was silver, dumped on BA XR's (i think or could be GT's) and also had a side skirt. Looked really good! Good tint on it also. Thought about getting a side skirt for it? Just an idea Hey doofus , Mate , I dream of skirts and bibs for my old girl everyday... but can't seem to get em anywhere... I even tried guys who do Limo skirts , but no luck... I can get custom made ones , but they are worth more than the car... hahaha So , as always , if you have any leads for me , will be happy to follow em up... Thanks Buddy.
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| doofus |
|
|||||
|
Lol yeah, i know what you mean mate!
Well, ive sorta done some digging in my piccy's folder, and ive come up with this. Best example i could find. EF/EL GTO Kit im guessing.. The skirt would suit you're car nicely! (Appologies to the owner of the car, but its the only one i could find  )
_________________
|
|||||
| Top | |
|||||
| MadMax19 |
|
||
|
doofus wrote: Lol yeah, i know what you mean mate!
Well, ive sorta done some digging in my piccy's folder, and ive come up with this. Best example i could find. EF/EL GTO Kit im guessing.. The skirt would suit you're car nicely! (Appologies to the owner of the car, but its the only one i could find )Yeah , I have seen similar to this... only problem is that they are about 8 inches too short... The old fairy box cars have the good ol stretched chasis , which is great for ride comfort , even when shes dumped , but no-one makes the extended skirts... Even a rare station wagon skirt doesn't fit.. So am going to try and find something like this , cut it in half , and possibly fibreglass an extension into the middle to suit... I am always looking for a challenge anyway... so we shall she what happens...
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| doofus |
|
|||
|
Sounds great mate!
Let us know of any updates 
_________________
|
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
looks sweet can we get an update with pics
im gonna be dumping my laine on 17s as soon as i get my back pay in prob is finding the right ones with the offset oh and if u want a real sweet look get the big shiny verticle silver grille from the LTDs ... looks sexy ben
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| MadMax19 |
|
|||||
|
SlickNCGhia wrote: looks sweet can we get an update with pics
im gonna be dumping my laine on 17s as soon as i get my back pay in prob is finding the right ones with the offset oh and if u want a real sweet look get the big shiny verticle silver grille from the LTDs ... looks sexy ben Hi Ben , Yes , that was the first thing I got when i went shopping at the wreckers.. a big a** shiny LTD grille... Now it looks good with the big a** shiny 18's and rubber bands... HERE ARE THE PHOTOS BELOW.... Can't ya tell IM EXCITED.... hahahaha NExt mission is window tinting , and a cruise to Newcastle guys !!!! Oh , by the way Ben , 17 & 18 wheels are good , but if you don't buy Pre_Au wheels , then you will have to get 35mm Bolt on Adaptors. Dont try and use spacers , because they are illegal and extremely dangerous... At least dont go any less than 25mm adaptors otherwise you will get rubbing problems on the inner bits...
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
|||||
| Top | |
|||||
| fordjared |
|
||
|
Far out, that is sweet mate...
If only i had somewhere to do it 
|
||
| Top | |
||
| MadMax19 |
|
||
|
fordjared wrote: Far out, that is sweet mate...
If only i had somewhere to do it Dude , All you really need is a structure to park it in and some plastic sheeting. I used a carport , and just hung plastic sheeting all around it to keep the wind out , and it worked great. The plastic also keeps the heat in too which allows the paint to cure quicker , so less chance of dust etc. Snickers00 did his like this as well , except he lined the inside of his shed with plastic , and he did a pearl coat which is even harder to do than acrylic. Or , you can just shop around and see who is doing a really good job amongst your local panel beaters... In My opinion , you have got the best coloured car... Just touch up the scratches with white colour match spray cans , and you can avoid the whole respray thing all together...
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 120 guests |
