|
| Timmeh |
|
||
|
Well things went more smoothly installing the short shifter on the XR8.
Only thing is now that apart from a little more noise in the cabin there is another sound I never heard before. I dropped the cross member to fit the shifter like normal but maybe I havnet put it back up as straight as it was before I left it?? I tightened the cross member bolts a little bit each, alternating as I did until they were back up and tight. It also feels like I have a little vibration now that wasnt there before. Do you reckon if I just undo the cross member bolts for the gearbox and do them up again it might come good or should I go see a driveline shop and get them to sort it? |
||
| Top | |
||
| kizzer |
|
|||
|
r u using the steeda shifter arm?
cause if u r like it rattles and vibrates alot in mine ey.
_________________ 1995 EF Fairmont with all the Gear. |
|||
| Top | |
|||
| Timmeh |
|
||
|
Nah I used the stock shifter handle with the rubber.
I'm going to undo the cross member again and refit it to see what happens. This time I will push it back up with a jack and then do the bolts rather than putting it back up with the bolts. |
||
| Top | |
||
| voxace |
|
|||
|
Is it like a noise that vibrates through the car especially when you're letting the clutch out from stand still.
|
|||
| Top | |
|||
| Timmeh |
|
||
|
No. Its a noise I got when I turn left. Seems like I've ever so slightly misaligned the gearbox when I put it back up. Also after I have gone past 3000rpm.
Noise wasnt there before I put it on but its there now. Later on today I will drop it and refit it and see what happens. Should only take me about 20 minutes. |
||
| Top | |
||
| Timmeh |
|
||
|
Well I've dropped it and put it back up now (cross member). Havent driven it yet.
Doesnt look like anything would of happened. The gearbox sits on a rubber block on the cross member so I couldnt of really done anything to it. Maybe I've done something to my exhaust or its all in my mind. |
||
| Top | |
||
| huggiebear |
|
|||
|
did you let the box drop when you were replacing it??? maybe your engine mounts s**t themselves and the vibration is the motor sliding about?
|
|||
| Top | |
|||
| Timmeh |
|
||
|
The gearbox dropped out 2 inches max.
I dont reckon enough to hurt the engine mounts. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 109 guests |
