|
| wicksy |
|
|||
|
theres a ef here at a car dealership, ex cop car, which is going to wholesale this week, whic is dumped on its a*** with snowflakes and it looks hot
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| stomper |
|
|||
|
snowflakes look like s**t
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| JOSE |
|
|||
|
trim 5mm (the un threaded part) off your studs and the mag wheel nuts will fit perfectly
_________________ Because i can. |
|||
| Top | |
|||
| stomper |
|
|||
|
well got home and took the steelies off
got tha mags and put it in place and gave it a couple of light taps and kept doing that till they were on....i thought that doing that wasnt gonna f**k the hub.... THEY ARE ON. Cheer guys. Im going to go to the wreckers and get some mag wheel nuts as its not cool to trim the studs. thanks all
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| smoke_ |
|
|||
|
i had a set of wheels that were tight on the hub so i ran some sandpaper over the hub bit on the wheel and they slid on. it didn't take much effort, but it had a cast spot which stopped it from going on.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| stomper |
|
|||
|
smoke_rubber wrote: i had a set of wheels that were tight on the hub so i ran some sandpaper over the hub bit on the wheel and they slid on. it didn't take much effort, but it had a cast spot which stopped it from going on.
Could have said something before....grr...its ok.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| smoke_ |
|
|||
|
well the way you were describing it i thought the nuts were the problem.
i recommend removing the rims and give em a light sand, cause if they were a real tight fit, they might be a pain to remove later on down the track. maybe even smear some grease onto it just incase.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| stomper |
|
|||
|
smoke_rubber wrote: well the way you were describing it i thought the nuts were the problem.
i recommend removing the rims and give em a light sand, cause if they were a real tight fit, they might be a pain to remove later on down the track. maybe even smear some grease onto it just incase. HA they are on how. lmao When i get new tyres next week ill do that because they all come off. Ill also get some mag wheel nuts at the same time.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| MadMatt |
|
|||
|
Stomper I had the fairmont rims on my EF. You need to either have the nuts drilled and thread tapped ($2.50ea thyey are a shaft and tapered nut) or put EA-ED studs on the car. Dont cut the the studs as it can weaken them. PM me if you need help with them.
_________________ Member Number 8804 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 110 guests |
12.06@120MPH
