|
| tim2x |
|
||
|
Hey guys, i want to remove my door moulds on my Ef falcon, how would i go about doing it wihtout scraching anything?
Cheers. |
||
| Top | |
||
| uglybob |
|
|||
|
pull them off, and prepare for the s**t tape underneath which will take ages to remove!
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Falcs |
|
|||
|
This might help a little...
_________________ -------- Falcs -------- |
|||
| Top | |
|||
| iam death |
|
|||
|
f**k me..intersexual is gone so someone wanker had to take his place....well good on f**k you....
_________________ 'WALKER f**k MY WIFE AND ALL I GOT WAS THIS s**t SIGGIE' |
|||
| Top | |
|||
| MARK.TANIA |
|
||
|
before you pull them off ,get a hair dryer and put it on a low heat run it along the door mould to warm it up a bit .be careful hot to burn the paint work .as you warm it up slowly pull the mould off doing this will stop the molds from bending ,and it helps with the tape as it will make it come off easyer to remove. i hope this has helped you out
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 128 guests |
