|
| djmikey |
|
||
|
Hey all, I have discovered this morning I am the proud owner of a stuffed starter motor. Are there any secrets or anything that would make it easy to change it (being stuffed under the manafold) in my ED.
Oh the car is on the driveway on a slope with not much room to move, and I am guessing fun times ahead. |
||
| Top | |
||
| Andrew J |
|
|||
|
Go from underneath! Tow it to somewhere flat, and put it on ramps or something.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| schnoods |
|
|||
|
Its really a one man job made easier with 2 ppl.
When i had to replace a starter motor on my old man f100 i got under neathe and took it out then got it conditioned . To put it back in we got a rope and hung it through the top , tied it to the starter motor so it would take the weight a bit and it was easy to line up from there.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| wicksy |
|
|||
|
it is easy with car ramps, only 2 bolts holding it in mate, u wont get it frm the top unless u take whole manifold off, which would be a prick too do, new ones should be bout $160
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| djmikey |
|
||
|
Sounds like a fun job ahead, I have picked one up from repco for $170, not have to get the bugger in
|
||
| Top | |
||
| glenneaux |
|
||
|
I got a new starter motor and fitted by auto elec for $210..
When me and j-flow fitted by el tickford motor we found it was easy to hold the starter motor in, get the lower bolt started.. and then get the top bolt started.. Then with some Team 1/2" Extension bar and 2x Universals j-flow held the extensions and universals in position from the bottom and i did the bolts up from the front of the intake.. GOOD TIMES!!!!!!!! |
||
| Top | |
||
| Brett3158 |
|
||
|
To get the car going firstly give the starter a couple of moderate taps with a hammer(this can place worn brushes to contact). If that doesnt work try changeing the starter relay for the headlight relay of the same colour. Those relays are behind the battery under a black cover. Starter relay is closest to the coolent bottle. If these bush mechanics tricks dont work then you will need the tow. And make sure you have checked your earth connections.
|
||
| Top | |
||
| fordzatmyplace |
|
||
|
Brett3158 wrote: To get the car going firstly give the starter a couple of moderate taps with a hammer(this can place worn brushes to contact). If that doesnt work try changeing the starter relay for the headlight relay of the same colour. Those relays are behind the battery under a black cover. Starter relay is closest to the coolent bottle. If these bush mechanics tricks dont work then you will need the tow. And make sure you have checked your earth connections.
I'd actually be making sure the +ve wires going to the starter are clean. Starter motors earth though the engine block anyway....
_________________ ^^^ What He Said
|
||
| Top | |
||
| Brett3158 |
|
||
|
Starters earth through the block which is why you want to make sure your main earth is ok.
|
||
| Top | |
||
| rushed |
|
|||
|
easy job, shouldnt take you long.
get front of car on car stands slide underneath. undo the two bolts catch the starter motor and replace with new one p.s. i last did this with the car parked half up on a gutter its not that hard, fidly but not hard. |
|||
| Top | |
|||
| xr8ster |
|
||
|
hmm
|
||
| Top | |
||
| phongus |
|
|||
|
dude i have a starter off my EA which i replaced about a year ago....though i never drove the EA since feb this year since i bought an EL....anyways if you need it you can buy it off me and its not hard to get in and out to my knowledge.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 85 guests |
