Howdy,

been a while since ive shown my head around here...almost a year i suspect. so firstly hellooooo!

secondly...i now have a BA falcon. I am wanting to put the aux audio cable in, im not going to bother effing around...i'll just buy it. But i want to put it somewhere semi attractive.

so i think ill put the aux cable into the back of the tissue box holder and just run a double ended headphone cable in...ive got all that sorted nice etc, no worries.

what i need help with is very simple...haha...how do i remove the tissue box holder without breaking interior components. basically, new car...if i can help it id rather not break of plastic clips etc making this an even more expensive job...does anyone have a simple step by step process on how to get this out...or possibly a picture of the movements required?

any help would be greatly appreciated.

next job, effing brake rotors. some nice slotted ones should go well where the current warped ones are easier than the old EL to do, no bearings to play with

Thanks Guys,

- Andrew

lol well have fun, you got about 20 screws to undo

i removed mine a few weeks ago and this is what i remember, gotta take the auto/man surround out (maybe cup holder too), than have to unscrew the black trims that run on the top sides to the icc, then once they are out there's like 2 or 4 screws to get the tissue bow surround out. i think thats it, from what i can remember

if you get stuck or anything let us know and i'll get some pics for ya

yay

Nah, it's not that hard.
you just want to remove the tissue box right?

1) Pull off the shifter surround. (Held on by clips)
2) Undo 2 screws which hold on the "wings" around the ICC
3) Undo the 2 screws which hold the tissue holder in
4) Pull out the tissue holder

15 min job if that.

Correct, that's all I did with mine.

when you buy the plug it comes with instructions from ford

oops ye that part wasnt too hard, i had a prick of a time cos i undid everything cos my cup holder doesnt line up properly, and it still doesnt cant work out whats wrong with it

Did you move the shifter, because the cup holder screws into the shifter from memory.

the cup holder just clips in and so does the shifter cover. what i dont get is where it clips into is one piece so i dont get why it wouldnt line up