Just wondering - would an EF (or EL) rocker cover fit in my '93 EB? I saw one at the wreckers and can't remember which one it's off - pretty sure it's EF. If it does fit, are there many things I need to do to make it fit, will this be expensive/difficult?

the cover will fit on where the gasket seals however where the ef's have bolts to hold the cover on the eb's have nuts and the seals are diffrent but you can still remove the threaded posts out of the eb rocker gear and replace with the ef bolts and seals, diffent rocker cover gasket as well ef having the half moons built in to the cover and ya might have a few spare holes in the ef cover where the throttle and cruise cables bolt down only visual thay wont leak oil.

i put one on mine and all you need is
-EL rocker cover
-EL rockerarm
-EL Rocker gasket
-all the bolts

its not hard to do i had more of an issue of keeping the seal on while putting the rockercover on,

hear is a pic of my EB with a EL rocker cover fitted, the reason i changed mine is not for the look but i had a tappet issue so i changed mine to a EL set up

 

 

Attachments:

1072.jpg [ 51.79 KiB | Viewed 127 times ]

search please