|
| 1993_EBII_XR6 |
|
|||
|
ive got myself a brand new condition el rocker to put on my eb....my plan is to paint it bright blue first before i put it on.
ive cleaned it all up and degreased it all. but should i sand it all back, or just put paint over the top?? |
|||
| Top | |
|||
| 1993_EBII_XR6 |
|
|||
|
.......
|
|||
| Top | |
|||
| eb_guy888 |
|
||
|
1993_EBII_S what was the point in that? dont try and get post count up, the guy wants help
it was been covered a lot mate, but basically, if all the paint on it now is even just spray over the top after u use a primer but if its peeling in places id take it right back so its all even I did mine blue and turned out well, but I had it half polished cause I was planning on polishing it completely and changed my mind so if theres spots, take it back, if its even then just spray over top, give it a good 5 coats to make it look real good |
||
| Top | |
||
| Walker |
|
|||
|
eb_guy888 wrote: 1993_EBII_S what was the point in that? dont try and get post count up, the guy wants help
it was been covered a lot mate, but basically, if all the paint on it now is even just spray over the top after u use a primer but if its peeling in places id take it right back so its all even I did mine blue and turned out well, but I had it half polished cause I was planning on polishing it completely and changed my mind so if theres spots, take it back, if its even then just spray over top, give it a good 5 coats to make it look real good Not sure if you noticed, but it was the same guy in both posts LOL. |
|||
| Top | |
|||
| Slick |
|
|||
|
use some acetone or wax remover to rid of decreaser after you strip all the paint off, you'll be surprise how waxy decreaser is. use heat proof enamel. your local automotive paint store should recommend which one to use.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| eb_guy888 |
|
||
|
haha dang didnt pay attention lol oh well, still post whoring haha
|
||
| Top | |
||
| 1993_EBII_XR6 |
|
|||
|
get over it...why the hell would i wanna post whore. im already past 50. so its not as if getting more is gonna benefit me...
|
|||
| Top | |
|||
| eb_guy888 |
|
||
|
fire up buddy
or grow up one or the other it was a joke |
||
| Top | |
||
| EB91XR6 |
|
|||||
|
i put a EL rocker arm and cover on mine i think it looks good but i dont think you can have a eb rockerarm and EL rockercover so i hope your doing both,
_________________ 1976 XC falcon
|
|||||
| Top | |
|||||
| 1993_EBII_XR6 |
|
|||
|
nar it works fine mate, coz i just used the same screw tops off the eb rocker cover.
|
|||
| Top | |
|||
| SlickNCGhia |
|
|||
|
eb cover looks way beter than the elf one IMO.
_________________ NC Fairlane Ghia. AU engine. Pacemaker 4499. 2.5" Redback Zorst, tints, red dash. 17in ba xr (e-series). Suzuki Across (suzi) Sexy in Black |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 93 guests |
