|
| aaron_hogan |
|
||
|
Does anyone have the specs handy for ford 6 rods?
Need to know what the big and little end sizes are also the thickness of the rod at the big end. looking at adapting some Chevy 6" H-beams. Yes i searched for this and couldn't find what i wanted. Please don't post s**t answers. Only factual responses ie: look it up in the manual or go measure a rod for me please. kind thanks
_________________ EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors). |
||
| Top | |
||
| Slick |
|
|||
|
aaron_hogan wrote: Only factual responses ie: look it up in the manual or go measure a rod for me please. What about you go & measure it yourself then research any aftermarket mop that will cast custom rods for the i6. Try US websites, there are alot of specialist over there that can machine custom rods out of billet steel or alloy then let us know the final cost. kind thanks 
or get your get yours tested, lighten & harden for less. "try ford falcon i6 engine specs" on the search engine, you'll find it there.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| aaron_hogan |
|
||
|
Why does everyone feel the need to try to spark some sort of f**k debate on it.
again... big end/little end and thickness, that is all i ask
_________________ EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors). |
||
| Top | |
||
| Slick |
|
|||
|
With out debates the thread will just get lost in the forum pages without answers. the more people you draw in, the better the chance of getting your answer & be entertain as well.
will leave it at that then.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| mr_sperm1 |
|
|||
|
aaron_hogan wrote: Only factual responses ie: look it up in the manual or go measure a rod for me please.
kind thanks sure, i'll just go and drop an rod out for you. brb. 
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| stockstandard |
|
|||
|
Quick measurements from EF rod
little end .910" big end 2.242" width @ big end .993" (Take this as a rough indication only)
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| balizticbobo |
|
|||
|
I was looking at running a chev Hbeam rod in my 250 xflow.
Crank would need to be turned down to 2.1" or 2.0" but side clearances is where you would have most of the problems. I believe that the chev rods run a narrower B/E bearing but i'm unsure. 5.4MOD v8 rods may be the go... Heres the link on fordsix.com where we try to make sense of things... http://fordsix.com/forum/viewtopic.php?t=33985
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| balizticbobo |
|
|||
|
STD B/end journal dia is 2.123-2.124"
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| aaron_hogan |
|
||
|
thanks for that fellas. i've had to register on ford-six to view the link.
_________________ EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors). |
||
| Top | |
||
| eb_guy888 |
|
||
|
aaron_hogan wrote: Why does everyone feel the need to try to spark some sort of f**k debate on it.
again... big end/little end and thickness, that is all i ask sorry mate but if u go abusing people and swearing soon as U come on this site ur not gonna b a well liked person im afraid |
||
| Top | |
||
| aaron_hogan |
|
||
|
Like me or not, internet doesn't equal real life.
You might see i have been a member here for quite a while, i'm here for the tech side not to pose as some wannabe expert, sell my busted junk or to make fluffy cuddly net friends with everyone who feels the need to post in a thread without actually answering the question. Hence my low post count. Look for me on other forums and you will see the same pattern...reasonable quality/low quantity. Also i would like to think that when posting i can contribute something constructive and remain on-topic. I'm sick of threads that constantly get hijacked and run off in different directions and debates constantly rage about the same topics time and time again. Try searching for topics and you get nothing but pages and pages of s**t. More posts where the question is answered properly ONCE would be of great benefit to many people. There is no swearing or abuse directed at anyone in particular. If it hurt your freakin' ears then SORRY but i just wanted to get in early to stop exactly this kind of in-teh-net keyboard warrior retribution happening, but it seems the same old behaviour just can't be beat out of some people even when its spelled out in the first post. This thread could have been closed on my previous post as the question has been ANSWERED. kthanxbye, Aaron
_________________ EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors). |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 88 guests |
