|
| Project_Corty |
|
||
|
I know everyone has their own method of kill switches but all I have to say is 1 word "Relay".
It aint to hard and its fool proof. Million ways you can hide the switch or make it impossible to get access to it. |
||
| Top | |
||
| XR6 EF |
|
|||
|
fiftyone wrote: Quote: The starter solenoid wire is the Red wire with Blue trace coming from ignition barrell. not sure about that, just had a look and there is no red with blue OR bluw with red wire. it was on mine but may be different on yours check with a gregorys or haynes book if you have one |
|||
| Top | |
|||
| fiftyone |
|
|||
|
XR6 EF wrote: fiftyone wrote: Quote: The starter solenoid wire is the Red wire with Blue trace coming from ignition barrell. not sure about that, just had a look and there is no red with blue OR bluw with red wire. it was on mine but may be different on yours check with a gregorys or haynes book if you have one what car do you have?
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| XR6 EF |
|
|||
|
ef XR6
|
|||
| Top | |
|||
| Ben_Daui |
|
|||
|
I bought my car with one fitted & if the right steps are not taken the car will only get REDS & will not start. The aim is that the driver is the EARTH for the car for the engine to turn over.
_________________ MEMBER 1390 |
|||
| Top | |
|||
| fiftyone |
|
|||
|
Quote: The aim is that the driver is the EARTH for the car for the engine to turn over.
um, sounds kinda dangerous
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| XR6 EF |
|
|||
|
if the wire isn't red n blue,
get a test light find a good earth connect it probe the wires till you find on that lights when no key in ignition=main power find the one that lights on ACC=ACC wire Then on Power= power wire the last one will light up only when key is turned to start this is the starter solenoid wire use this to make your kill switch |
|||
| Top | |
|||
| boost1105 |
|
|||
|
Ben_Daui wrote: I bought my car with one fitted & if the right steps are not taken the car will only get REDS & will not start. The aim is that the driver is the EARTH for the car for the engine to turn over.
what is the driver earthed to exactly? its probably not dangerous otherwise it wouldnt be used |
|||
| Top | |
|||
| Slabz |
|
|||
|
you need to cut the fuel or spark to make it work properly. if you only cut starter motor then they can just push start it (admitedly very hard for autos) but just a thought
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
| Top | |
|||
| Ben_Daui |
|
|||
|
fiftyone wrote: Quote: The aim is that the driver is the EARTH for the car for the engine to turn over. um, sounds kinda dangerous Well you dont get shocks from it & lets just say that a wire is connected from the ignition to some where hidden & when the key is turned finger on the barrel & on the hidden spot the car starts but if the driver does'nt have their hand/fingers on the barrel & spot as said before reds will only light up & no cranking.
_________________ MEMBER 1390 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
