|
| Joesau |
|
||
|
well i used sikaflex on the inside of the boot lid frame. i just seen that expanda foam in the holes along the rigdes of the boot lid that looks like a great idea that crap is messy to use but. Each triangle section of the bootlid i used the stuff that Jaycar sell, i bought 6 rolls of it. Ihave a bit of Dynamat as well laying around but i dont know where to put it yet.
The side walls of my boot and the rest is about 40% complete so i can still improve a heap, the floor is done around the wheel well only. http://www.jaycar.com.au/productView.as ... &SUBCATID= |
||
| Top | |
||
| Busso |
|
|||
|
lol how did the sikaflex go ? did it prevent any rattle ?
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| Joesau |
|
||
|
put it this way that sikaflex is strong as. its holding my brake pads in too lol its strong and it worked. iN terms of rattle i filled watever i could, im really happy with wat i have done so far, i have one or 2 rattles only on certain songs mind you. this expanda foam has given me ideas again. My mate with his Ef used that stuff and he has no rattles with 2x15's but its alotta work i think.
|
||
| Top | |
||
| huggiebear |
|
|||
|
na its not alot of work, point and spray (just dont fill it up to omuch as it expands 300%) then cut it off with a knife ones its dry (24 hours) thats all i did
|
|||
| Top | |
|||
| Busso |
|
|||
|
might bust some sikaflex on there tomoro
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| Joesau |
|
||
|
Jaycar also make a deadener like dynamat only cheaper
http://www.jaycar.com.au/productView.as ... &SUBCATID= |
||
| Top | |
||
| Joesau |
|
||
|
i think i'll worry bout it later. i still gotta change my factory headunit yet and then tune it in properly with the new headunit. Once thats complete then i'll look at deadener again.
|
||
| Top | |
||
| skidder |
|
|||
|
sikaflex is the s**t....just get one and pump it into every rattley crack you can find
_________________ {USERNAME} wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| NiNoPace |
|
||
|
i got the premium sound kit on my AUII XR6 and we have a rattling bootlid wen i turn it up too high. Hopefully if I try a few of these ideas I'll be able to fix it. Only minor but the premium sound was no stock s**t sound system ooof it pumps.
|
||
| Top | |
||
| MooseMan |
|
|||
|
Yeh I used sikaflex on my EB and it worked wonders fixed every rattle. A mate used that expanding foam on his VL and it made a few little dents in his bootlid. I would recommend sikaflex covered with some sound deadener.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
