Fordmods Logo

xf wheel stud pattern??? 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: xf wheel stud pattern???
Posted: Sun Jun 18, 2006 5:15 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 721

Joined: 31st Dec 2005

Ride: EF V8 Futura, 180sx

Location: Brisbane, Burpengary
QLD, Australia

hey guys
ive been looking on ebay and talking to a few shop about mags but i seem to find my self help less because i don't know what the xf stud pattern is.
I know it 5 stude

but whats the off set?
and whats fitment? like Commodore 5x120?
guessing 5 stud and 120mm gap ive got no idea!!!

Also
can 10"(265) mags fit on back of xf and 8"(235) on front???

i think thats really all i need to know

Thx
Jason

 

_________________

Ford EF Futura Black
18" koya Strykers, AU engine with port and polish EB head, crow valve springs, standard cam, Large aftermarket RX7 turbo, T5 manual 3" intercooler piping, 600x300x100 intercooler core, MSII with innovate wideband O2 sensor and guage. BA F6 bodykit

Top
 Profile  
 
 
Posted: Sun Jun 18, 2006 5:30 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 18th Jun 2006

Location: adelaide
SA, Australia

i run 16 x 8's all round with 245/50/16 on rear and 225/50/16 on front. a 235on the front may scrub the guards depending on mag offset [how far the mag sticks out from the hub] and how low your car is, the same would apply to the rear for the 265.
Top
 Profile  
 
 
Posted: Sun Jun 18, 2006 6:17 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

i THINK it's 5x 116.4 or 114.6, im not sure but its somthing like that.

i've seen plenty of xd-xf's with s**t 12 slotters with 265's.
235's are fine at the front too, i'm running them on an xe ute (same suspension).

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Sun Jun 18, 2006 6:44 pm 
Smokin em up
Offline

Posts: 205

Joined: 8th Nov 2004

Location: geelong
VIC, Australia

I'm fairly sure its 5 by 114.3 i dont know the offset xfs need. I went and looked at the back of my el gt rims and they did'nt even have any info stamped on the back regarding offset.
Top
 Profile  
 
 
Posted: Thu Sep 14, 2006 11:36 pm 
Parts Gopher
Offline

Posts: 65

Joined: 18th Apr 2005

Ride: F150

Location: Carrum Downs
VIC, Australia

The correct size is 5 on 4.5" bolt circle.

My FD LTD ran 275/60-15 on 15 x 7 Globes with standard rear suspension.
Top
 Profile  
 
 
Posted: Fri Sep 15, 2006 10:36 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4323

Joined: 17th Jan 2006

Ride: Soarer 2.5GT-T

Location: Cranbourne
VIC, Australia

the stud pattern is 114.3*5, offset is +5 to +10 "pre au offset".
Top
 Profile  
 
 
Posted: Thu Sep 21, 2006 1:52 am 
Fordmods Newbie
Offline

Posts: 9

Joined: 23rd May 2005

Ride: fALCON

Location: Reservoir
VIC, Australia

I used to work in a tyre/wheel centre. The five stud ford pattern is 5x114.3, or 5 x 4.5 inches (remember, ford ARE american!!)

As far as the offset is concerned, I seem to remember them being 39mm+. Could be wrong - I was also researching Cortina wheels at the time :)

 

_________________

Nothing is impossible

Top
 Profile  
 
 
 Post subject: wheels
Posted: Sun Oct 29, 2006 5:56 pm 
Fordmods Newbie
Offline

Age: 62

Posts: 15

Joined: 19th Jul 2006

Gallery: 6 images

Ride: ZH Marquis

Location: Tamworth
NSW, Australia

for your XF the PCD is 114.3.....and your offset is 41mm but anything pre AU will fit
Cheers
Mick
Top
 Profile  
 
 
Posted: Mon Oct 30, 2006 12:15 pm 
Getting Side Ways
Offline

Age: 43

Posts: 9452

Joined: 9th Nov 2004

Gallery: 4 images

Ride: Fordrunner 5.0 Turbo

Location: Wollongong
NSW, Australia

CRUSHU wrote:
The correct size is 5 on 4.5" bolt circle.

My FD LTD ran 275/60-15 on 15 x 7 Globes with standard rear suspension.


What was the tyre clearance with rubber that wide. I'd love rubber that wide on the back of an XF without scrubbing the guards.
Top
 Profile  
 
 
Posted: Mon Oct 30, 2006 1:30 pm 
Oompa Loompa
Offline

Age: 39

Posts: 40

Joined: 19th Jul 2006

Ride: Falcon

Location: Sydney
NSW, Australia

Yea I'm pretty sure they are all 5x114.3 before the AU as my EL is 5x114.3.

I have read something that said there is a different disc/hub setup between an AU1 and AU2 Falcon and I'm interested to know if that's when Ford decided to change the stud pattern. Are AU2 onward 5x120?

 

_________________

EL XR6

Top
 Profile  
 
 
Posted: Mon Oct 30, 2006 1:45 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1181

Joined: 13th Dec 2005

Gallery: 3 images

Ride: 98 Patrol

Location: Maryborough
QLD, Australia

Vredesbyrd wrote:
Yea I'm pretty sure they are all 5x114.3 before the AU as my EL is 5x114.3.

I have read something that said there is a different disc/hub setup between an AU1 and AU2 Falcon and I'm interested to know if that's when Ford decided to change the stud pattern. Are AU2 onward 5x120?

nope AU-BF same

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Oct 31, 2006 7:55 pm 
Parts Gopher
Offline

Posts: 61

Joined: 6th Nov 2004

Ride: XF 4.1 EFi

Location: Wollongong
NSW, Australia

The XF is the same as the E-series falcons. i know that for sure. I run EB rims on mine.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 10:40 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names