|
| Walker |
|
|||
|
Hehe idler arms on X series falcons aren't much better.
Everytime i've jacked one up to check the front end you can guarantee the idler was jumping up and down. |
|||
| Top | |
|||
| Brett3158 |
|
||
|
I bet an idler arm lasts a lot longer in an "X" series than any model Val,
 but even so, you dont have have the "X" sitting higher in the front than the rear like you do in the Val with torsion bar front end. Any good looking Val with the front lowered or level is on its bump rubbers unfortunately. At Bathurst the Vals lost around 10mph topend because of the loss of aerodynamics with the front high enough to stiffen the front suspension enough to get them around the corners.
But all the same, in 1980 with a set of basic engine sensors controlling the ignition timing on a carburated engine, Chrysler Australia had a car pulling 205+hp and yielding 35mpg, a feat still not accomplished by ford with fuel injection and other expensive electronic crap. Long live the memory of what might have been...and yeah..Hey Charger \/.... |
||
| Top | |
||
| Macca |
|
|||
|
LOL while you are talking Hemi 6's I don't recommend the 215 (3.5L), it is undersquare, stroke is much bigger than bore, it sounds like it is reving hard until you check it with a taco.
http://en.wikipedia.org/wiki/Chrysler_A ... engine#215 I had one in a Centura and if the car wasn't around 1150kg it would have been a slug, I still kick my self for not keeping it and fitting a 265, it was Kermit the frog green, straight, shiny chrome, white seats and I fitted EF/EL exchaser rims (saved me painting them silver), I machined the centres out of the rims to suit the Chrysler larger hub. I sold it in Rockhampton because I couldn't drive two cars back to Singo, and the engine had developed a tappet like rattle and it wasn't lifters LOL
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| vik351 |
|
|||
|
FMD,I still remember that add
Hey Charger V
vik...Even saw Alvin Purple's Charger at the royal show  Noice white fluff,no back seat 
_________________ [b]BANNED[\b] |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: and I fitted EF/EL exchaser rims (saved me painting them silver), I machined the centres out of the rims to suit the Chrysler larger hub.
that's what I did to my VJ, sept, I fitted my Speedy Longchamp mags, had to machine the inside to fit... The one thing alot of people told me about the Hemi 6's is they don't like to be reved right up. |
|||
| Top | |
|||
| schnoods |
|
|||
|
I had a 360 powered CL Panel van with drifter stripes, 727 tranny and dana a*** end.
Its Criminal to power a mopar by ford. Besides they built the val motors alot more reliable too.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| KeeddleZ |
|
|||
|
thought it was relivant
engine bay aint that pritty, but it will be!
_________________ 360 CL Lebaron
|
|||
| Top | |
|||
| Vic |
|
|||
|
{USERNAME} wrote: mate keep the hemi motor and spend some money on it they fly when you throw some cash at them
Love that Challenger... If there is one thing the U.S. did right from the late 60's, it was designing some of those muscle cars.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| KeeddleZ |
|
|||
|
Hey are those photos from outside AB performance in ozzie park?
_________________ 360 CL Lebaron
|
|||
| Top | |
|||
| XR9UTE |
|
||
|
Cleveland will fit with some custom mounts and headers and while your at it throw in a Loader.
Ive seen a Cleveland in a HG Ho.. Hol.... Hol... er piece of s**t ute.... Does 9's now. Anyway it'll be the best thing that ever happened to it. Pete. |
||
| Top | |
||
| Mac Winter 76XB351GS |
|
|||
|
Holy crap, I didn't expect to get this much of a response. Im going to let Benny know about that 360. Well if the 245 has this much potential, if the 360 falls through we'll start doing it up or swapping it out for a 265.
_________________ 76XBGS, 383c, custom crow cam, 4V p&p heads, Isky SS Valve+springs, extractors, 2.5"twins, MSD Ignition, Edelbrock intake, Forged bottom end, Barry Grant 750DP, thermo, discs, toploader, Holley fuel pump, SUPERCHARGED! |
|||
| Top | |
|||
| balizticbobo |
|
|||
|
360's will spin bearings if you rev them too hard without oiling mods...
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| schnoods |
|
|||
|
there is so much more on the market for vals form pentastar parts and also hemi peformance so u can buy all the existing mounts and all , even to suit a 440 magnum
 .
better to keep it in the family.
_________________ Because of Beer, Thirst is a Beautiful Thing! |
|||
| Top | |
|||
| 409Stroker |
|
||
|
oh yes those photos are out the front of AB PERFORMANCE in ozy park those guys are ledgends and steve there engine builder is GOD. they are doing my 393 alloy head clevo for me and i must say they rock they now there s**t thats for sure...they mainly play with Hemi's but what ever they touch turns to gold !!!!! i advise any one in perth to see them if they want good pricers and service and super performance for your dollar.
_________________ If you have it under control then you dont have enough power..
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
)
