hye guys.

well i got my hands on a el motor been strippping it down and cleaning it up as well as going to replace all gaskets befor its installed. what im trying to work out is the wireing for it all ..

i got hold of a el xr6 comp too pretty sure its for a auto . is there neway to find out ?/

as my car is manual. i want to install the xr6 ecu to run the bbm right

neway with the wireing harness what will i have to do to it for it to fit in the eb . ie what plugs do i need to change and what will i need to run to where to get the bbm working right?


here is a few pics of the loom that came with the motor can ppl please tell what plugs r what and what goes where. or ne wireing diagrams would be of great use.

cheeres.

 

 

Attachments:

DSC00286.JPG [ 59.89 KiB | Viewed 152 times ]

DSC00285.JPG [ 51.1 KiB | Viewed 120 times ]

DSC00284.JPG [ 58.62 KiB | Viewed 129 times ]

mate i've done what you've done... that is el xr motor into a box car....

I reused my EB engine loom and just extended the bits that needed to be longer.. I then ran the extra wire to the ECU and the power wire for the BBM switch..

EDIT:::

Also .. remember to run the extra wire(s) for the knock sensor .. and make sure u dont "lose" your oil pressure sender wire.. i "lost" mine and once the motors in its not very easy to get to/mess with the loom...!!

im doing the BBM conversion now but im using the EA/EB computer.

cool. might just have to do that.


the elxr ecu will plug straight into the exsisting loom right?

if so what wires do i run to the ecu and what wire should i tap it into ?
and for the power switch on the bbm?

never played around with the motor befor only everything else lol.

yeah the EL computer will go in (EF's wont) also you HAVE to have smartlock otherwise you WILL need a smartlock iliminator which are around 150 bucks

as for the wires im not sure which one runs the BBM switch

yeh already have smart lock and thermos installed

so no worries there just the wireing im bit iffy about .

ok the TPS is apparently the only one that needs changing. the others fit straight in apparently. so cut the plugs so that you have plenty of wire length and colour match the plug. view my thread in my sig for pics