|
| shnoza |
|
|||
|
i agree with you. get a t5..
_________________ "Chuck Norris does not sleep. He waits."
|
|||
| Top | |
|||
| balizticbobo |
|
|||
|
Go for it... Ditch the auto and get a T5..!
I'll be ditching the single rail soon for my top loader... single rails are to slow to shift..! Your auto is a pain is the a**... Want a c4 with a 3500 stally 
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| provked |
|
||
|
Hey bobo i could be interesed in a C$ with a stally, would suit my xr sweet as, let me know what its like and how much.
Sorry bignik about that, just think that at least you can beat a lot of us, and the auto is a good excuse to go a manual you wont look back!
_________________ 05 BA futura wagon, dumped, 19s, limo tint ( now the wifes car! |
||
| Top | |
||
| efbignik |
|
|||
|
any one tell me what you need for a t5 change over
bellhousing tail sharft what elses do i need
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| balizticbobo |
|
|||
|
C4 was in my old TE behind a 250 xflo. I do have a v8 bellhousing to suit also. Converter is small 4 stud bolt pattern. Same as early windsor I believe.
If your still interested, im looking for $350 for box and stally...
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| balizticbobo |
|
|||
|
Clutch cable, manual pedals, can use existing pedal box when used with a billet pin kit. Gearbox wiring loom. Manual Centre console???
Flywheel, clutch, kebab, cold beer, stubby holder, New flywheel studs, loctite, Spigot bearing, and a rattle gun. Maybe the diff could do with an oil change... And some synthetic gearbox oil.
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| balizticbobo |
|
|||
|
On another note, once you get the manual back in, we'll have to organise a crew to drag there cars to a Heathcote Test and tune day....
Should I start a list... 1. Balizticbobo - reminder to self... Bring Spare axles...
Later we can work out a date....
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| efbignik |
|
|||
|
i think i'm ganna have to do it cuz it wants to go
faster you can feel it when you drive it but it's just not getting the i mean a 10.16 1/8 is too f**k so in my books
_________________ EFBIGNIK 145.9 RWKW Falcon / 16.27 @ 86.72mph (Stock)
|
|||
| Top | |
|||
| balizticbobo |
|
|||
|
My 1st corty pulled a 10.5 down the 1/8th, with a slipping clutch, and a single spinner diff. The 1/8th is still a lot of fun...
Wilby 1/8th mile drags are on 3rd of december. Im aiming for a Flat 9 or high 8 on slicks. Only managed a 9.57 at heathcote. Do you get your MPH at the Warrick drags? Cos at Wilby you only get your time... Eventually..!
_________________ 13.28@103.73mph |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 23 guests |
