|
| fritzz |
|
|||
|
heres the link for when it was for sale
http://www.fordforums.com.au/showthread ... ge=1&pp=25
_________________ # 1997 EL Falcon GLI - 600+rwkw |
|||
| Top | |
|||
| Mr.Kiss |
|
|||||
|
I asked what is close to the Garrett gt3540...
Quote: Hi, I would recomend the masterpower T-60 p trim .84ar
The gattett gt3540 is actualy a garrett gt3582 compressor 61mm/82mm. This is very similer to the masterpower t-60 60.5mm/84mm, The p trim is closest to the gt35 84trim turbine, however the p trim is slightly larger so i would recomend using with slightlly smaller housing ar to compensate this like .84 or .96. running the .84 or .96 will help to acheive similer flow and responce charictoristics of the gt35 1.06 turbine. The .96 is available with v band, the .84 is not. The t-60 is suitable for aprox 600hp+, speacial price for T-60 including 3day fedex airfreight is $980au. non in stock until 20th-25th of this month. So i guess I'll probably go for: t-60 p trim AR .96
_________________ My Cars |
|||||
| Top | |
|||||
| EBXR8380 |
|
|||
|
Master power are good cheap turbo's..
The general consensus on turbo mustangs is they are o/k.... They are floating shaft bearings made in South America....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| gryph |
|
|||
|
Agreed ^^^^^^ Brazil to be exact
|
|||
| Top | |
|||
| EBXR8380 |
|
|||||
|
A.R is like saying 65 series tyres.... The size of the rim comes into it as well....As you can see the over all size of housing comes into it....
P trim in this case isn't size its the angle of blades and how close they are which changes the spool of turbine it can allow more exhaust to flow though at the expence of higher spool...I have twin .63 housings which SHOULD spool intantly ... BUT with 'P' trim T 4 T350 exhaust wheel it spools around 2800.. On Precision T3/4 hybrid for example... Here's comparow of VG30 turbine to T3/4 hybrids with P trim 
_________________ As in ZOOM 126 edition |
|||||
| Top | |
|||||
| gryph |
|
|||
|
Hey ebxr8, If you could be bothered an awesome idea would be a sticky in here on turbo sizes since u seem to have a fairly large knowledge of these things.
|
|||
| Top | |
|||
| EBXR8380 |
|
|||||
|
Check size of turbo then compare map to boost / power level you require...There is No point fitting a 1000 h.p turbo and fitting a MASSIVE wastegate to keep boost down to control power...
To the left is surge line, the aim is be close to the small island as much as possible... http://not2fast.wryday.com/turbo/maps/garrett.pdf On page 30 is the Gt37 map.. Here's some other maps... http://www.turbomustangs.com/turbotech/ ... ressormaps Here's some info on reading Maps and understanding A.R etc... http://www.turbomustangs.com/turbotech/main.htm This GT42 would be alittle too big as power you'd require is too high or CFM would be too high so it would make it very laggy...As an example.... This may help also...http://www.turbomustangs.com/techarticl ... turbos.doc Doc ll http://www.turbomustangs.com/techarticl ... 20list.xls See how these maps vary as turbo gets bigger??? http://64.225.76.178/catalog/compmaps/fig1.html
_________________ As in ZOOM 126 edition Last edited by EBXR8380 on Tue Oct 17, 2006 1:00 am, edited 1 time in total. |
|||||
| Top | |
|||||
| Mr.Kiss |
|
|||
|
Thanks, thats some very very usefull info!!!
_________________ My Cars |
|||
| Top | |
|||
| Mr.Kiss |
|
|||
|
Well I've Ive desided To go for the following:
Masterpower T-60, T4 turbine P trim 0.84ar, approx 620hp. Will post up all the specs when i get them. I will be ordering in the next week!
_________________ My Cars |
|||
| Top | |
|||
| Mr.Kiss |
|
|||
|
Quote: I asked what is close to the Garrett gt3540...
Quote: Hi, I would recomend the masterpower T-60 p trim .84ar The gattett gt3540 is actualy a garrett gt3582 compressor 61mm/82mm. This is very similer to the masterpower t-60 60.5mm/84mm, The p trim is closest to the gt35 84trim turbine, however the p trim is slightly larger so i would recomend using with slightlly smaller housing ar to compensate this like .84 or .96. running the .84 or .96 will help to acheive similer flow and responce charictoristics of the gt35 1.06 turbine. The .96 is available with v band, the .84 is not. The t-60 is suitable for aprox 600hp+, speacial price for T-60 including 3day fedex airfreight is $980au. non in stock until 20th-25th of this month. "T-60, aprox 620hp. largest trim available in the small size 3.3" T-series wheel. only availble with the T4 turbine range from O, P, and gtQ" Bugger I still cant deside what turbine .AR to go with, .84 or .96 
Other than that i think this turbo sounds alright... (waiting on complete specs) Thoughts anyone???
_________________ My Cars |
|||
| Top | |
|||
| Mr.Kiss |
|
|||
|
Well i finally made up my mind,
The specs to the T-60 are... floating bearing with 360deg thrust. Oil cooled. compressor T-seires T-60, 60.5mm/84mm .7ar comp housing using reflow (antisurge 4" inlet, 2.5" outlet) Turbine mpbt 74trim ( GT P trim) .84ar
_________________ My Cars |
|||
| Top | |
|||
| gryph |
|
|||
|
Let us know how it goes mate very interested in this.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
