Fordmods Logo

Battery/alternator issue? 

 

Page 1 of 1 [ 15 posts ] 

 
 Post subject: Battery/alternator issue?
Posted: Fri Nov 10, 2006 12:45 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

ok, yesterday gave the engine a bit of a degreasing. after which i went for a drive, all was sweet, car was then sitting for about 20 mins, started it again, and the volts went upto 14.8ish on the guage. and the battery light was flashing on and off, and it eventually went away after about 5 mins.

this morning went to goto work, the volts went upto 15v on the guage and then drop[ped to 14.8 and just sat there with the battery light on, had to get to work so i just drove it, work is only 5 mins anyway.

now, after i have been driving i turned the car on, then bought it back to the KOEOff. so key in the on position, with warning lights on. and the volts start at arouind 13ish, then drop back to about 11.8.


whats the issue here? voltage regulator? knocked something degreasing? got something where it shouldnt be?

Cheers.

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Fri Nov 10, 2006 4:41 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

bump.

any ideas?

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Fri Nov 10, 2006 5:01 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1063

Joined: 22nd Aug 2006

Gallery: 20 images

Ride: FG XR8, F6 F6 ute, XR5T, Capri

Location: Perth
WA, Australia

i did something similar. it was a little wire (on positive terminal) that came off. i put it back on and it hasnt gone wrong since
Top
 Profile  
 
 
Posted: Fri Nov 10, 2006 7:54 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

check the 2-pin plug to see it isn't full with water.
have you put a multimeter across the battery to see what voltage it's getting?
the light may have come on because some crap got into the alternator. my old fairmont did this and im an auto elec and i drove it for 6 months and it never failed.
but it could possibly be your alternator, you'll have to at least check it with a multimeter and keep an eye out for the battery light.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 1:53 am 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

ok update.


today i pulled the battery out, cleaned up the terminals, checked all the earth points etc.

pulled the plugs out of the alt and gave em all a wd40 spraying. cause i was bored pulled the thermos and changed the belt cause it looked a little tired, killed all the battery tray rust and painted it.

put it all back togeather, battery light was off.

you beauty!

then went to go for a drive later on today, the f**k came back on SPEWING! 15 mins into the drive the light started flickering before going off. awesome, it might be ok.

drive later tonight, the lights back on, you f**k C***.

so is it possible there is nothing wrong with the ALT/BAT and there is jsut a s**t connection somewhere for the battery guage? the volts according to the guage are sitting between 13.8 and 14.4, occasionally creeping up towards 14.8. but mainly 13.8 to 14.4


any more ideaS?

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 10:58 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

it's low on brushes mate.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 4:48 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

so im looking at a new alternator?

ffs, what is that gonna be worth?


more importantly, is it ok to drive for a little while?

got an exam tomorrow morning and i dont want it to die half way there.

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 5:44 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

If it's still getting some charge, it should be ok to drive. Put the charger on it overnight if you're worried.

Alternators are pretty easy to pull apart and you could try replacing the brushes yourself.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 7:09 pm 
Getting Side Ways
Offline

Age: 37

Posts: 4609

Joined: 29th Jul 2005

Gallery: 10 images

Ride: BOXCAR

Location: Launceston
TAS, Australia

voxace wrote:
If it's still getting some charge, it should be ok to drive. Put the charger on it overnight if you're worried.

Alternators are pretty easy to pull apart and you could try replacing the brushes yourself.


not unless you have a rattle gun and a impact driver

also pulling them apart and putting it back together without stuffing it are two completley different things.

And that assuming that the slip ring dosen't need replacing

 

_________________

^^^ What He Said

<a href="http://www.fordmods.com/forums/viewtopic.php?t=44952" target="_blank" class="postlink"> TAS Cruises</a>

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 7:17 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

cheers, ill drive to the exam tomorrow should be ok seeing the volts are staying up atm, as long as i get there, dont care about gettin home :P

ill drop into the local auto elec on the way home and get his diagnosis.

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 7:19 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

if it's a bosch, there's a black box on the back. replace it is a quick fix.
mitsubishi alternators are a bit more harder.
what fordz says is pretty spot on if your gonna give it a full service.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 7:43 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

smoke_rubber wrote:
if it's a bosch, there's a black box on the back. replace it is a quick fix.
mitsubishi alternators are a bit more harder.
what fordz says is pretty spot on if your gonna give it a full service.


It's a regulator, I believe the part number is RE60 off my head.
Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 8:30 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

fordzatmyplace wrote:
not unless you have a rattle gun and a impact driver

also pulling them apart and putting it back together without stuffing it are two completley different things.

And that assuming that the slip ring dosen't need replacing


Really, what for?
I did my AU mitsubishi alternator, and the only tricky bit was the getting the brushes to hold back when putting it back together.
Are the EF one's different by any chance?

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Sun Nov 12, 2006 11:01 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 5924

Joined: 5th Nov 2004

Gallery: 7 images

Ride: Ford FPV FG F6 310

Power: 149 rwkw

Location: Brisbane
QLD, Australia

twr7cx wrote:
smoke_rubber wrote:
if it's a bosch, there's a black box on the back. replace it is a quick fix.
mitsubishi alternators are a bit more harder.
what fordz says is pretty spot on if your gonna give it a full service.


It's a regulator, I believe the part number is RE60 off my head.


yes i know that, im a tradie auto elec, and yes its an re60 regulator.

 

_________________

NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter!

R.I.P. BF XR6 Turbo - You will not be forgotten :( 12.06@120MPH

Top
 Profile  
 
 
Posted: Mon Nov 13, 2006 3:55 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

just saw the auto elec today.

he said hes surprised its still charging.

he thinks when i was washing some gunk and water got washed into the alt and probably shorted out the warning circuit. maybe some of the brushes to, but he said as its still puttin out full voltage its seems to be working ok.

said it might die some time, but as long as its puttin out 12.5 - 15v just ignore the light, if the voltages get funky, then its time re replace it.

now, weres that tape to stick over the light. ;)

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 15 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 87 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 10:43 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names