this needs to be made a sticky, the amount of friggen times this has been answered.

AU ones WILL NOT SLOT ONTO EF/EL

ratman ones WILL FIT the following: EF Gli/Futura/XR/Fairmont/Fairmont Ghia, as well as EL Gli/Futura/XR

NF/NL ones will fit NF/NL/DF/DL/EL Fairmont/EL Fairmont Ghia

EL Fairmont & Ghia's had, from memory, the same shape indicators, but recieved orange not clear ones.

spot on there bob

Thats it all in a nutshell.

Fraser, do we know about XH an s**t like that since thats what AMber orgiinally asked?

This thread proved my point ROFL!!

One says one thing, another conficts that!


Thanks Fraser, maybe a sticky should be made. Not of this thread, but 1 post stating what fits what.


Thanks everyone.

XH is the same as EL 'mont/ghia
but becafuse of the mould as said the AU ones wont fit your funbus. The XH has no moulds in the guard where the repeater is

ok all, to try head off some of the confusion - the indicators that I can get will suit the following:

1) The first pic is of my brothers ELXR8 - standard side rubbing strip, pointier style indicator - no shroud mould so to speak.

2) again this is the indicator on a standard base model falcon with the thin side strip.

3) the green ghia also is suitable with this type of shroud mould - note the ends take the standard pointier shaped indicator - not my car so I'm note sure if its an EF or EL

4) the silver ELGhia is my other brothers old car, note the indicators DID NOT suit, we used fairlane ghia items as his shroud was slightly different - see the slight door opening rebate on the leading edge of the door and the chrome strip inset. If your side moulding is like this, you are better off getting the factory fairlane items as mentioned

I hope that clears up any confusion.

 

 

Attachments:

indicator-03.JPG [ 51.38 KiB | Viewed 390 times ]

indicator.jpg [ 19.81 KiB | Viewed 393 times ]

IMG_0007.JPG [ 870.58 KiB | Viewed 389 times ]

16-12-00-08.JPG [ 72.63 KiB | Viewed 180 times ]