|
| Waggin |
|
|||
|
$1000-1500 from a workshop.
Under $500 to DIY, unless the head needs to be replaced.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| Andrew J |
|
|||
|
Ace wrote: It'd be over a grand EASY... I'd expect about $1500 depending on the damage to the engine internals really...
Unlucky mate  Id hope not! Ive reaplced my head twice now (both times done at a shop after splitting it under the camshaft), once under warranty. The first time cost me 1300, which included the reconditioned head and obviously a head gasket. The plkace I went to was fairly reasonable, and helped me figure out things along the way. After getting water in the oil again, they tried to pass it off as condensation due to a hgher compression and blowby, and that theyd seen it on many cars. It was leaking water but, so they had a search around, replaced radiator cap, cracked hose, and heater tap, which all needed replacing, for free. That being said, they didnt listen to my original instructions of putting everything broken back in the boot of the car, so i lost a full set of brand new plugs. Oh well, the second head for free was good enough for me.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| XGPANELVAN |
|
|||
|
i suggest if dont think you can do it or want to do it your self and are going to get a mechanic to do it, at least pull the inlet and outlet manifold off, undo the head and clean it up your self, then tow it to the mechanics yard and get him to do the rest, that'll knock off an hour or 2 off labour costs
_________________
|
|||
| Top | |
|||
| pepsimax |
|
|||
|
took me 2 days to do my ea head gasket,only cause 3 of the bolts would not undo..
it cost me under 200 all up,,didn't need the head machined because it was still pretty straight,,and clean for that matter..wasn't to hard.. how the hell do you put pictures up here,,i've tried the buttons but it don't work
_________________ NO ONE DIES A VIRGIN AS LIFE SCREWS US ALL |
|||
| Top | |
|||
| XRFan101 |
|
|||
|
lockz wrote: any 'milky' reside on the bottom of the oil filler cap?
YEP and idleing like s**t blows a bit of smoke sometimes and some sort of liquid out the exhaust sometimes Ahh yeah thiers your problem there mate, sounds like it is quite F***! Not being rude but get it checked out asap!!!!
_________________
|
|||
| Top | |
|||
| lockz |
|
||
|
yeah f**k it , rang mark from its performance 2day , go to bank tomorrow .....its all good
 
_________________ Tape deck , standard ride height.
|
||
| Top | |
||
| madmax |
|
|||
|
lockz wrote: cant say i have.
sounds like its f**k. whats a head gasket cost to get replaced? ...might just be a good excuse to get a bank loan and go to ITS PERFORMANCE  I had mine done before christmas cost me just over $700, however there was nothing wrong with the head only the gasket was leaking externally. Price included machining, pressure testing and inspection of head by All Head Services.
_________________
|
|||
| Top | |
|||
| lockz |
|
||
|
where abouts did u get that done?
_________________ Tape deck , standard ride height.
|
||
| Top | |
||
| madmax |
|
|||
|
lockz wrote: where abouts did u get that done?
GS&M Automotive Pennisula blvd Seaford
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 37 guests |
-BF MKII XR6 Turbo in EGO-
