Fordmods Logo

cam angle sensor position 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: cam angle sensor position
Posted: Sat Nov 18, 2006 8:28 pm 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 17th Sep 2006

Gallery: 5 images

Ride: 95 EFII Futura Wagon

Location: Sydney
NSW, Australia

Does anyone know how I can check the cam angle sensor position to make sure it's right? Or is close enough good enough and will the ECU work the timing out?

I took the bloody thing out (trying to resovle rough idle) and the gear on the end moved slightly. I put it back to where I thought it was but I'm not sure that might be right.

 

_________________

"My theory is that the universe is made out of stupidity because it's more plentiful than hydrogen" - Frank Zappa

Top
 Profile  
 
 
Posted: Sat Nov 18, 2006 8:49 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

It only has to be very roughly in the right place as the ecu only uses it to work out when the engine is on the compression stroke.

From memory, the correct way to install it is to lock it in place by inserting something small into the hold in the body and rotating the gear until it clicks into place. Once locked, just push it in with the engine at TDC so that it lines up with the braket.

hope that makes sense.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Sat Nov 18, 2006 9:04 pm 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 17th Sep 2006

Gallery: 5 images

Ride: 95 EFII Futura Wagon

Location: Sydney
NSW, Australia

Thanks. makes good sense. :wink:

That would be TDC on cylinder 1 I assume?

 

_________________

"My theory is that the universe is made out of stupidity because it's more plentiful than hydrogen" - Frank Zappa

Top
 Profile  
 
 
Posted: Sat Nov 18, 2006 9:26 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

Yep, TDC for cylinder 1 on the compression stroke.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Sun Nov 19, 2006 2:11 am 
Getting Side Ways
Offline
User avatar

Age: 53

Posts: 8590

Joined: 5th Nov 2004

Gallery: 5 images

Ride: AU Fairlane 5.0, KE Laser, 01 Kw

Location: Melbourne
VIC, Australia

Yeah that's about it, you stick a pin into it to lock the shaft in place to line it up.
You'll see the hole in the body of the sensor, throw a pin or whatever you can find into it and turn the shaft, you'll soon feel it lock into place.
Top
 Profile  
 
 
Posted: Sun Nov 19, 2006 3:41 am 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1807

Joined: 6th Feb 2006

Location: CENTRAL
VIC, Australia

F**K me walker, you ok? infomative reply whats with that??? i was about to sugest you read this http://www.fordmods.com/forums/viewtopic.php?t=22265
Top
 Profile  
 
 
Posted: Sun Nov 19, 2006 1:34 pm 
Getting Side Ways
Offline
User avatar

Age: 53

Posts: 8590

Joined: 5th Nov 2004

Gallery: 5 images

Ride: AU Fairlane 5.0, KE Laser, 01 Kw

Location: Melbourne
VIC, Australia

fastleno wrote:
F**K me walker, you ok? infomative reply whats with that??? i was about to sugest you read this http://www.fordmods.com/forums/viewtopic.php?t=22265

What the f**k are you on about?
Top
 Profile  
 
 
Posted: Sun Nov 19, 2006 2:47 pm 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1807

Joined: 6th Feb 2006

Location: CENTRAL
VIC, Australia

Walker wrote:
fastleno wrote:
F**K me walker, you ok? infomative reply whats with that??? i was about to sugest you read this http://www.fordmods.com/forums/viewtopic.php?t=22265

What the f**k are you on about?
walker plz ignore that reply, it was my engament party last night and i got very very drunk, i dont remeber posting that or what the f**k i was on about either :oops:
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 76 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 11:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names