|
| EFFalcon |
|
|||
|
wanting to discuss some simple questions.
what are peoples oil pressure like once their car is turbod? (mine crap) do you use any kind of restrictor or jet in the oil line to control pressure? (no) where do you get your wastegate reference from? straight out of turbo, after intercooler or in manifold? (just after turbo) what PSI spring have you got in waste gate, and what are you actually seeing on the guage?
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
can let you know oil pressure hopefully today when i finally start her.wastegate reference is stright from turbo houseing,
no idea about my wastegate spring will have to wait till i drive it
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| ebs_4l |
|
||
|
hot pressure at 2000rpm is about 55psi, idle hot, bout 25-30 with 15w-50 oil
no restrictor in oil feed line since the garrett gt series have the restrictor built into the oil inlet wastegate reference from plenum have 7psi spring, will run about 9psi minimum, boost control holds the boost very flat when running anything more than spring pressure
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| fritzz |
|
|||
|
about 50psi at 2000rpm when hot and 25-30psi at idle when hot. thats with HPR 15.
im running a 7.5psi spring in my gate with the pressure line coming from the compressor housing. without my controller on it will see 9-10 psi
_________________ # 1997 EL Falcon GLI - 600+rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
