|
| dicko17 |
|
||
|
I've got a BA with only front power windows. Its a pain in the a*** to hold the switch down to completely lower the glass. I've noticed some have "auto" writen on the switch. i assume that means one push of the switch and it goes down all the way. Does anyone know if its a simple swap of my existing switch cluster with the "auto" type to gain this feature or is it more involved?
cheers
_________________ "Cos you know and i know better"
|
||
| Top | |
||
| GlennBA |
|
|||
|
The 4 switch and the 2 switch have different plugs on them so i think it may be a drama.
|
|||
| Top | |
|||
| burrissracing |
|
||
|
I know a guy in victoria that does the conversion and also can put different colour illumination in where there is no wiring provision. You can call him on 0405705945 (andrew)
|
||
| Top | |
||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
The auto down feature only on cars with back power windows as well as the front. You'll need that wiring loom.
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| Ugly Igley |
|
|||
|
fnp wrote: The auto down feature only on cars with back power windows as well as the front. You'll need that wiring loom. Not quite the case. There should be a circut board directly connected to the switches itself.
If you could get your hands on a four swithc and swap out the two fronts to you existing 2 switch it may work Then again it may not.... I had some experience with this with the EF/EL setup, hopefully they havent updated the power window switch technology too much.
_________________ Proud owner of one of very few BF SR manual (June 06 build) |
|||
| Top | |
|||
| MilleniumFalcon |
|
|||
|
Wouldn't some Utes have come with the auto feature as well? It'd be kinda odd if the XR's didn't have it.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
