I need a few bits from an XD/XE/ZJ/ZK 302 Cleveland. Mostly I need a good distributor, heads (closed chamber to raise the compression on the 351 in my Coupe), and some brackets.

For ease of use, I'll take a whole motor (or better still a wrecked car), or whatever you have. Heads rebuilt for unleaded would be best, but not important.

I am happy to pay or I can swap some E-Series V8 parts or even a whole motor. I have an Explorer manifold, 65mm TB and EGR spacer. Obviously the Clevo would have to be in pretty good condition to swap all the good parts. I don't really want to lose the loom and computer from the EFI 302 but for the right deal I would consider it.

I also have the power steering and aother accessories from an EB Fairmont V8.

I am in Adelaide and something local would be best, but I would consider freighting parts.

where abouts are you located in adelaide...wouldnt mind checking out the coupe...i have always wanted one

I am just north of the city.

The carb is being tuned tomorrow, and I fit a Crane XR3000 ignition with optical pickup to it today so it will more than likely go on the next local cruise. It may also be at the All Ford Day next year (it was there is '05, wasn't ready for '06).

I hear there is a cruise at marion saturday night. Meet in the carpark at 6. U know of this?