|
| ozzie99 |
|
||
|
Hey guys, I have a 95 EF Shaggin, total cheese but man it's fun and practicable. Just thought you might like to know, I have recently installed a pair of Kenwood 6x9's in the two rear doors, moving the rear speakers from the tailgate to the passengers feet.
They fit snugly, no problems with the window or its wiringn no problems with it touching the seat or floor rails or passengers!. I have mounted them on some small carpet covered spacers and they look at treat. The best part, although they are not in a direct line with the ears, they sound great. The Kenwood 6in I have mounted in the usual spot in the front doors work well enough to give me clarity. Has anyone else seen this before?
_________________ So here's this bum waving a knife like he's the leader of some knife parade... |
||
| Top | |
||
| twr7cx |
|
|||
|
Nope. The rear speakers in my wagon have never been an issue, I turn the stereo off when the dogs in the back and he's the only thing or person that usually goes in the back.
I did end up replacing them when the original stocko speakers fell apart but. So got any pictures of your handy work? |
|||
| Top | |
|||
| ozzie99 |
|
||
|
What? Ol mate doesn't get to rock along with you when he's in the car ! Haha, I didn't really have a problem with the one's in the tailgate (apart from the sad a*** sound quality coming from the stockies) but I wanted to put a sub in just behind the rear seats. I thought having a sub in front of the 6x9's would be a bad thing?!?! That was my logic anyway.
I don't have pics yet, but I'll take a few and post them up soon 
_________________ So here's this bum waving a knife like he's the leader of some knife parade... |
||
| Top | |
||
| andrewts |
|
|||
|
The Commodore and subsequently commodore wagons had this, and it sounds pretty damn alright, good work shifting them mate! Anticipating pictures of the work!
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
nah i don't think that the bass of the sub and that does any good for the dogs ears so i just turn the whole lot off off if it's a long trip fade all to the front speakers.
|
|||
| Top | |
|||
| nlbxr6 |
|
|||
|
I put my 6x9s in the tailgate and my 2x12s face the rear so the bass bounces of the rear screen.I have no bass coming out of the 6x9 and i also mounted a set of tweeters above the rear seat belts.I chose not to put anything in the rear doors because you get best sound when speakers are aimed at the occupants.6x9 are a good alround speaker but if you putting a sub in a set of componants or two ways would suit better
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
| Top | |
|||
| ozzie99 |
|
||
|
Cheers andrewts, it took a bit of time rewiring everything with good cable and feeding it with the looms into the doors, but well worth it. It's not the most pretty thing yet as I haven't designed some pods, they are on spacers to see how it sounded, and i like it! So, next pods... know anyone who can build em for me? Pics coming soon!
nlbxr6 - I like the 6x9 with the bass cut out, so its a strong mid range, do you think some componenets would do the job? I guess I haven't gotten myself up to speed on the newer kit thats out these days! I agree totally on the aiming of the speakers though. twr7cx - I'm glad to see you look after your best mate, some blokes I know just blast them regardless.... come to think of it.. they are a little deaf these days haha
_________________ So here's this bum waving a knife like he's the leader of some knife parade... |
||
| Top | |
||
| nlbxr6 |
|
|||
|
So, next pods... know anyone who can build em for me? Pics coming soon!
have a look in my gallery I made my front door pods I started with dna pods to suit a 6 and tweeter and screwed them to 16mm mdf and glassed on a 4 inch spacer then finished with body filler and covered in vinyl took me about about 4 hrs each one
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
| Top | |
|||
| ozzie99 |
|
||
|
Nice job, I'm sad to say but mine was just a screw and mount job. Nothing as flashy as that! I'll have to pull my sleeves up now, I have something to compare to haha. Is the whole mould and shape from the glass work?
_________________ So here's this bum waving a knife like he's the leader of some knife parade... |
||
| Top | |
||
| nlbxr6 |
|
|||
|
{USERNAME} wrote: Nice job, I'm sad to say but mine was just a screw and mount job. Nothing as flashy as that! I'll have to pull my sleeves up now, I have something to compare to haha. Is the whole mould and shape from the glass work?
The dna pods are glass so I positioned them and screwed them onto the base I had to cut a section out then I cut a hole for the 4 out of 2mm mdf and cut the mdf about 15 mm biger than the hole then screwed it with spacers at the angle I wanted to the base and screwed some offcuts to the base to give me the rough shape then glassed it all together and finished it off with body filler
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
| Top | |
|||
| ozzie99 |
|
||
|
That's a lot of work, nicely done.
 How do you find the weight? I know my 6x9's are fairly heavy on those old door skins.
_________________ So here's this bum waving a knife like he's the leader of some knife parade... |
||
| Top | |
||
| nlbxr6 |
|
|||
|
{USERNAME} wrote: That's a lot of work, nicely done.
How do you find the weight? I know my 6x9's are fairly heavy on those old door skins.put em on the scales sorry its friday arvo I screwed the pods to the trim from behind then screwed them to the door once the trim was fitted this way the trim dont vibrate
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
