|
gavxr8 |
|
||
|
hi guys just wondering whats the best extractors would be be best to get for my ef xr8 and what price i would i be looking at
|
||
Top | |
Interceptor |
|
||
|
personally i'd go for a set of pacemaker PH4000's
_________________ Banned |
||
Top | |
brett351 |
|
|||
|
dont know about the newer cars, but the pacemakers are nice on the clevo
_________________ Keep Australia Beautiful. Drive a Ford.
|
|||
Top | |
Neal-50 |
|
|||
|
yeah its all about the paceys. my nf 302 has them on it now and you feel the differnce in the engines torque straight away. there is also a slight exaust note change depending on the rest of the system. 2.5inch system with the standard cat and 1 high flow muffler makes heaps of difference.
_________________ Pround memeber Team DYNAMIC WHITE
|
|||
Top | |
gavxr8 |
|
||
|
what sort of price
|
||
Top | |
banarcus |
|
|||
|
Use the yellow pages or get the parts peddler. Prices vary a lot so dont go to one place, try at least 3.
|
|||
Top | |
mugen |
|
||
|
{USERNAME} wrote: hi guys just wondering whats the best extractors would be be best to get for my ef xr8 and what price i would i be looking at
go the pacemakers 1 5/8 extractors...just had them put on my EF xr8 and you can feel the difference in straight away...much more torque in the lower rpm's..use your existing cats and get them opened up to 2 1/4 same as high flow's,thats what I did and 2 1/2 single system with one straight thru muffler and a mandrel bend over axle...very nice sounding system.. |
||
Top | |
XR8Chic |
|
|||
|
Try this site..
{DESCRIPTION} They sell pacemakers with jet hot coating. and they sell direct to the public too. Prices are pretty good, and are actually cheaper than some places charge for uncoated pacies.
_________________ 1993 ED XR8 - Poly Green |
|||
Top | |
memnoch |
|
||
|
{USERNAME} wrote: hi guys just wondering whats the best extractors would be be best to get for my ef xr8 and what price i would i be looking at
well i got a price for a set of my el 5.0, a set of competition pacemakers, and a set of stainless steel high flow cats fitted and supp, for $1400
_________________ 232.5 RW KILLER WASPS |
||
Top | |
TerroristGHIA |
|
|||
|
I fitted Lukey Extractors, 1 3/4 primaries, noticed a big difference in the top end. Bottom end torque also picked up, but had to remap the unichip as it was running lean in the top end.
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
memnoch |
|
||
|
are the factory headers worth anything, that come with the 5.0
_________________ 232.5 RW KILLER WASPS |
||
Top | |
MrLandau |
|
|||
|
The ELGT/FBT/EL2XR8 ceramic coated stainless steel extractors aren't too bad when compared to the standard ones - but nowhere near as good as longtube extractors that aftermarket manufacturers like DiFillipo make. Depends what you are after.
Shane
_________________ Weapons of choice |
|||
Top | |
memnoch |
|
||
|
where abouts in melb are difillipo xorst
_________________ 232.5 RW KILLER WASPS |
||
Top | |
memnoch |
|
||
|
ok i'm getting my pacemaker headers done on sat morning.. they are the competition coated headers they are tune 4 into 1 with twin polished stainless steel cats fitted for $1400
_________________ 232.5 RW KILLER WASPS |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 45 guests |