|
| ebs_4l |
|
||
|
.7mm
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| EXAR6 |
|
||
|
cheers mate. 2 moz ill try connecting up my reg the otherway and ill c wat happens. but im pretty sure its connected correctly.
|
||
| Top | |
||
| EXAR6 |
|
||
|
corrected spark plug gaps to 0.70mm and it just made the car run rough.
havent tryed connecting the reg the other way yet. |
||
| Top | |
||
| EXAR6 |
|
||
|
just connected fuel reg the other way and there was no difference at all. could this mean that the reg is fualty?
|
||
| Top | |
||
| ebs_4l |
|
||
|
i cant see it mentioned here, so ill ask anyway..
have you had a fuel pressure gauge on it?? have you got a fuel pressure gauge?? or have you pulled the reg out the box and fitted it with no adjustments??
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| jet ute |
|
||
|
{USERNAME} wrote: its running 7 psi. wat spark plug gap should i have? I run 6mm and dats runing 9 psi!
_________________ Super Pursuit |
||
| Top | |
||
| EXAR6 |
|
||
|
{USERNAME} wrote: i cant see it mentioned here, so ill ask anyway..
have you had a fuel pressure gauge on it?? have you got a fuel pressure gauge?? or have you pulled the reg out the box and fitted it with no adjustments?? nah i havent checked fuel pressure and i dont have a fuel pressure gauge. the obx reg doesnt have any adjustements its just a rising rate reg but no adjustable. i didnt ask for this reg but its wat geoff sent me and he been a prick about send me a vortech adjustabe rising rate reg. |
||
| Top | |
||
| ebs_4l |
|
||
|
BINGO, id say theres ya biggest problem....
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| EXAR6 |
|
||
|
deleted. fixed up everything with geoff. my bad
Last edited by EXAR6 on Wed Dec 13, 2006 5:54 pm, edited 2 times in total. |
||
| Top | |
||
| Tocchi |
|
|||
|
i havent got 2 responses (to my 2 seperate emails) from Snort for a while now. a month or 2. which sucks. cos i have to get a manifold and piggyback ecu from them
|
|||
| Top | |
|||
| EXAR6 |
|
||
|
everything is all sorted now and the car runs excellent for standard comp and injectors. doesnt ping/detonate. i set the boost to 5psi and retarded the timing about 6 degrees.
the problem was the fuel pump. i didnt cut the cradle and it was blocking the filter and no fuel was getting threw. however i still didnt cut the cradle cos if you cut the cradle when you have about quater of petrol the car will surge and the cradle stops that from happening. so i modified the fuel pump bracket and few things and its goes good. thanks for all your help boys cheers rob |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
