|
| aaron_hogan |
|
||
|
Don't piss away money on a spare XR6 turbo engine for the conversion. Just build the existing engine with a/m piston rod combo and sort your electrics out. The turbo side is the easy part of this job as a GT3540r is roughly $1700 new. Use stock manifold and heat shielding.
IMO there is not enough difference between the n/a and turbo engines to justify the price difference...possibly with the exception of the iconel exhaust valves in the turbo heads. /my 2c
_________________ EA SVO Fairmont Ghia - Recaros, Bilsteins, Sunroof, SVO rims and body kit, Genie headers, DBA rotors. T5 steeda triax short shifter. 3.27 lsd. (EL 4.0 ported/polished, rebuilt and balanced, Dev5 cam. J3 chipped EL ecu, AU injectors). |
||
| Top | |
||
| TURBOTAXI |
|
||
|
Agree that the turbo should just be put on to the standard car. There are kits for about $5k with 700hp water cooled roller bearing turbo's.
_________________ Turbo AU falcon LPG 222.5 RWKW. |
||
| Top | |
||
| smiley235 |
|
|||
|
{USERNAME} wrote: ECU: you may be able to get a ford dealer to reflash the PCM with turbo software however its possible (and likely) that the non turbo ecu won't have some of the required circuitry inside. I'll look into this one... I heard on the other forum someone flashed the NA ECu with the turbo software and it just wouldn't work, must be some difference in circuitry. Not sure if the BF's are any different though, On another note, I also read in a magazine that BF xr6t have identical pistons to those used in the typhoon.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
