|
| SIM |
|
|||
|
Thats it guys im dropping a 8 in her. who knows how easy this is gonna be?
Its currently got the 250 in with 3 spd auto, i know ill have to change engine mounts just unsure on the g/box any help would be great as im planning to do it next sat
_________________ RIP Scotty |
|||
| Top | |
|||
| Walker |
|
|||
|
You'll need a box for it too.
You'll also need to change the engine mount plates that are bolted to the front cross member. Otherwise she'll be a very straight forward job. Have you got everything as far as radiator, accessory brackets, bolts etc? |
|||
| Top | |
|||
| SIM |
|
|||
|
Nah havent got another radiator, did they use diffrent ones in the 8's?
Got plenty of bolts etc and can always make up a bracket. Also hav a mig any chance i can get the bell of another box for the 3 spd?
_________________ RIP Scotty |
|||
| Top | |
|||
| Walker |
|
|||
|
What auto, Borg 35 or C4?
Borg can't go behind an 8, and they barely hold up behind a 6 lol. Go to a wrecker and get all your alt, power steer brackets and anything else you might need. It kind of sounds like you're trying to do it on a shoe string full of short cuts, by doing that you'll run into nothing but problems. |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
tail shaft too while your there , and as paul said The brackets of the xmember you will need as it wwont bolt up to the 6cyl brackets and also i thingk the shifter rod is on the other side for a C4 box so you mite need the v8 shifter box
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| SIM |
|
|||
|
ok guys thanks alot ill post what ive got when ive got it all
_________________ RIP Scotty |
|||
| Top | |
|||
| Walker |
|
|||
|
{USERNAME} wrote: tail shaft too while your there , and as paul said The brackets of the xmember you will need as it wwont bolt up to the 6cyl brackets and also i thingk the shifter rod is on the other side for a C4 box so you mite need the v8 shifter box
There are ways around that, i used an XF shifter, i cut and modified the linkage to come out the opposite side. Reason being, V8 shifters were bringing big money, especially XD/XE as they had the bracket on them to house the quadrant. Tailshaft will be fine depending the the box you put into it. |
|||
| Top | |
|||
| SIM |
|
|||
|
whats a c4 worth these days from a wrecker?
_________________ RIP Scotty |
|||
| Top | |
|||
| Samsy |
|
|||
|
Should be able to pick up a C4 box for about $100 -$150. Check ebay too.
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| SIM |
|
|||
|
The words in your sig are why its gotta b an 8
_________________ RIP Scotty |
|||
| Top | |
|||
| Samsy |
|
|||
|
Heres a C4 for sale
http://cgi.ebay.com.au/Ford-C4-Auto-Tra ... dZViewItem Although I just noticed it might be a bit too far away from you 
_________________ XB 351 and BA GT |
|||
| Top | |
|||
| SIM |
|
|||
|
cool so there not very expensive. i should be able to find one around the local area. Hope tail shaft will be ok
_________________ RIP Scotty |
|||
| Top | |
|||
| 66 coupe |
|
||
|
try tony @ superoo, he should have good runners for a couple hundred.
|
||
| Top | |
||
| SIM |
|
|||
|
Will do mate cheers
Think I might move all my nitro s**t to the XC when shes an 8
_________________ RIP Scotty |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
