Does anyone out there know what the error codes for the Smartlock system as used in EBII & ED Falcons?

The problem with mine is when the ignition key is turned on to accessory position the warning lamp on the cluster flashes 7 times then stops then it flashes another 7 times then it stops again then it flashes another 7 times then it stops then the lamp stays on all the time with ignition key on or engine running.

P.S. I have decided to use the spare key I have to see if the problem is with the key itself in an attempt to learn the other key.

I know what the problem is.

According to my Max Ellrory repair manual, Error 7 is problems with boot switch or release solenoid.

The thing is these are working fine.

The worst case scenario is the Smart lock module is most likely crook.

Now the thing is going into the imobilized state & that means having to wait about 30 mins before I can start the car.

How much is a second hand smart lock module from a wreck to fix the problem once & for all?