|
| Wave_Man |
|
|||
|
Hey everybody...
I'm after a set of Stock spring to Suit...NL fairlane. Willing to Swap for Really Really Hard Rear! hahaha... Willing to pay... Oh course Thanks
_________________ Blown EL..
|
|||
| Top | |
|||
| Walker |
|
|||
|
SLS, or non SLS?
|
|||
| Top | |
|||
| Wave_Man |
|
|||
|
Walker wrote: SLS, or non SLS? Ummm.... haha...
I'm a Noob when it comes to cars.... Could you please explain to me a little! thanks
_________________ Blown EL..
|
|||
| Top | |
|||
| Dan. |
|
|||
Posts: 396 Joined: 22nd Aug 2006 Ride: ED Fairmont Ghia, XH Outback, EF Location: Gnangara, Perth |
Self Levelling Suspension... are the springs your after to suit SLS or not to..
Correct me if I'm wrong but your model will more than likely have SLS
_________________
|
|||
| Top | |
|||
| Wave_Man |
|
|||
|
Dan. wrote: Self Levelling Suspension... are the springs your after to suit SLS or not to.. alright now i get ya.... Ok... Under the car it has a little Motor shaped device, with an arm on it, end of arm is a balljoint. On the diff is TWO struts(?) One as a Balljoint on it.... BUT there is nothing between the motor thingy n the strut....
Correct me if I'm wrong but your model will more than likely have SLS My guess was it was for Abs... to tell the car where the weight is in the car while under brakes. The car is a 99 NL fairlane Ghia... It has a XR6 motor... Hope that Helps me! haha Thanks Mate
_________________ Blown EL..
|
|||
| Top | |
|||
| Wave_Man |
|
|||
|
Oh... the motor thingy is NOT on the springs or shock... It's near the Spare wheel bay
_________________ Blown EL..
|
|||
| Top | |
|||
| Walker |
|
|||
|
See if the fuse has been removed for it, if it has then they've replaced the shocks and springs with std.
Probably an easy way for you is drop the back seat down and remove the plastic cover, see if it has the lines screwed into the top of the shock. Anyway, seeing as you're replacing the springs, if it has SLS then replace the shocks with std jobs and piss off the SLS. |
|||
| Top | |
|||
| Wave_Man |
|
|||
|
I thought it was to do with abs is... I believe that that person who owned it before me was towing a caravan or horse float... Just because if the back was draggin than under heavy brakes the front would understeer?
Anyway so i should check the top of the shock? for lines? what kind of lines you talkin about? I haven't got the car yet, it's gettin a RWC n i should have it by friday... I just want to F**K off these Hard as springs in the rear.... Thanks
_________________ Blown EL..
|
|||
| Top | |
|||
| Walker |
|
|||
|
I'd say he already removed it if he was towing.
They're basically small plastic lines and they're screwed onto the top of the shock. Just open the fuse panel, whenever i've fitted the std setup i just pull the fuse out for the SLS, otherwise the light on the dash will annoy the s**t out of you. |
|||
| Top | |
|||
| Wave_Man |
|
|||
|
Cheers.
I'll make sure i check it out. So there is no point in having the SLS? thanks
_________________ Blown EL..
|
|||
| Top | |
|||
| fiftyone |
|
|||
|
got a stock set in the shed. if there what you need let me know
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
