|
| Bazzo |
|
|||
Age: 38 Posts: 150 Joined: 10th Nov 2005 Ride: 2007 BFII xr8 Ripcurl ute Location: Gladstone |
i have an 98xh xr6 and the auto gear knob is getting loose. has some thing come loose or has some thing broken in there? i have had a look but i dont know exactly wat to look for. any help would b great.
thanks bazzo |
|||
| Top | |
|||
| rushed |
|
|||
|
it ahppens from time to time, simple fix
gunna sound odd but hang with me.... -do the bolt under the handle up a bit more. -handle should be come loose. -turn handle a little left of where you want it. -now try to "undoo" the bolt, this will tioghten it up against the handle. -when tight, turn the handle to traight on (from the leftish angle it was on)you should need some force to do this. hope that helps |
|||
| Top | |
|||
| Andrew J |
|
|||
|
Set the handle slightly clockwise from where you want it, tighten the nut with a flat spanner by rotating it anti clockwise until it locks up on the bottom of the shifter, and then turn a little bit more, which should bring the shifter back to where you want it
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| Bazzo |
|
|||
Age: 38 Posts: 150 Joined: 10th Nov 2005 Ride: 2007 BFII xr8 Ripcurl ute Location: Gladstone |
sorry guys. think i might of said it wrong. the actual stick is wat is loose. not the knob where u push the button in
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
rushed wrote: it ahppens from time to time, simple fix
gunna sound odd but hang with me.... -do the bolt under the handle up a bit more. -handle should be come loose. -turn handle a little left of where you want it. -now try to "undoo" the bolt, this will tioghten it up against the handle. -when tight, turn the handle to traight on (from the leftish angle it was on)you should need some force to do this. hope that helps The bolt??? Or do you mean nut? |
|||
| Top | |
|||
| phatal |
|
||
Age: 42 Posts: 517 Joined: 3rd Dec 2004 Ride: SZ Titanium & ZG Fairlane Location: Roxby Downs |
If it is just the stick then it is two bushes in the stick assembly. I got ford to replace them for me and it is like new now. Can't remember the names of them but the ford place should know. Probably easy to do yourself if you wanted to.
_________________
|
||
| Top | |
||
| kut&shutkustomz |
|
||
|
them bushes are about $3 each from ford ..you need 2 .easy d.i.y.
dave ..
_________________
|
||
| Top | |
||
| rushed |
|
|||
|
The bolt??? Or do you mean nut?
probably, i did give a warning about "this might be a little odd" im not going to give ALL the secrets away 
|
|||
| Top | |
|||
| EF-XRAN |
|
||
|
hahahaha sorry man, no offence or anything but s**t. There's a thumping great nut on the bottom of the shifter head/gear knob which should be obvious as to its purpose.
Maybe the beer is making me seem more of an a**hole than usual and if so, I apologize but f**k... I'm not the worlds greatest anything and that was like the first thing I did with my EF 
_________________ -- Tympanic Membrane Desecration -- |
||
| Top | |
||
| Bazzo |
|
|||
Age: 38 Posts: 150 Joined: 10th Nov 2005 Ride: 2007 BFII xr8 Ripcurl ute Location: Gladstone |
i have got the bushes from ford and have the bottom of the shifter stick showing. do i need to undo the nylon nut that is on there? im not sure where the 2 bushes go
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 72 guests |
