|
| Private9 |
|
|||
|
Hi All,
I have an EL sedan I'm wrecking that has tinted windows. I've swapped all windows except for the back one into my EF, and I'm now wondering if it's possible to remove the back window, and if so is it hard? Thanks, Justin. |
|||
| Top | |
|||
| el_xr6_luke |
|
|||
Age: 37 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
my rear window was removed without smashing when i had the respray done, its back in now.
|
|||
| Top | |
|||
| ELGT |
|
|||
|
They are an encapsulated screen, and therefore it is not recommended to refit them. Buy a new one from Ford, because the rubber is not removeable, and therfore, lots of silastic is required.
|
|||
| Top | |
|||
| Private9 |
|
|||
|
Hmmm, does encapsulated mean it's structurally loaded, and not just sitting there?
From what you're saying I take it that the rubber around the window is not reusable? Sounds like it might be cheaper and easier to just get the existing window tinted. |
|||
| Top | |
|||
| Black Betty |
|
||
|
They are reusable it's just alot harder to get them out because you have to cut them out from the inside to try and not damage the rubber.
|
||
| Top | |
||
| bowsaw |
|
|||
|
We use a special tool, like a 90 degree blade, slips under the window and cuts the rubber, piss easy.
|
|||
| Top | |
|||
| Private9 |
|
|||
|
Black Betty wrote: They are reusable it's just alot harder to get them out because you have to cut them out from the inside to try and not damage the rubber.
So if I cut with a stanley knife from the inside, I should be able to get the window out? If so, is it possible to swap my back window rubber from my other car to this window as it is in much better condition? |
|||
| Top | |
|||
| nlbxr6 |
|
|||
|
Private9 wrote: Black Betty wrote: They are reusable it's just alot harder to get them out because you have to cut them out from the inside to try and not damage the rubber. So if I cut with a stanley knife from the inside, I should be able to get the window out? If so, is it possible to swap my back window rubber from my other car to this window as it is in much better condition? It is easier with tool that bowsaw described and no you cannot use the other rubber encaptulated means the rubber is made as part of the glass an windscreen mob will charge around 100 to remove and refit a rear it can be done no problem but if you only want it for the tint it would cheaper to get yours tinted
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
| Top | |
|||
| Private9 |
|
|||
|
nlbxr6 wrote: Private9 wrote: Black Betty wrote: They are reusable it's just alot harder to get them out because you have to cut them out from the inside to try and not damage the rubber. So if I cut with a stanley knife from the inside, I should be able to get the window out? If so, is it possible to swap my back window rubber from my other car to this window as it is in much better condition? It is easier with tool that bowsaw described and no you cannot use the other rubber encaptulated means the rubber is made as part of the glass an windscreen mob will charge around 100 to remove and refit a rear it can be done no problem but if you only want it for the tint it would cheaper to get yours tinted Thanks for that! Yeah, I've decided to simply get my EF window tinted, far too much work involved in changing windows (having said that I've already done the rest!) |
|||
| Top | |
|||
| stomper |
|
|||
|
removal is easy if you dont have the tool. Simply get the cable used for the bonnet release and have it bare.
Then use that to cut the rubber out. Its a bit of work but they come out. You may need another person to help you.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Private9 |
|
|||
|
stomper wrote: removal is easy if you dont have the tool. Simply get the cable used for the bonnet release and have it bare.
Then use that to cut the rubber out. Its a bit of work but they come out. You may need another person to help you. I was all set on giving it a go, but the outside rubber isn't the best, the one on my EF is much better - and seeing as the rubber's cannot be swapped, I think I'll just leave it! Maybe when the car's basically a shell, I might have a go, as it won't really matter if I stuff it! |
|||
| Top | |
|||
| Pulco |
|
||
|
ive changed a couple...was electric...dont know if that makes a diff but we got a couple out and changed them..
in an ef that is
_________________
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
