|
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
Hey guys
ive got a ef fairmont and ive just put dobison super lows in i was to fix the camber before it completly chews out my tyres. Who running super lows? if so how far did you top control arm get shimmed? i can buy shims in 1.5mm and 3mm Thx
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| noisy |
|
||
|
go to a steering specialist and get it done right
_________________
|
||
| Top | |
||
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
im hopping it less that 4mm then i don't have to buy the camber kit save me over 100 and it would do the same job
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
{USERNAME} wrote: go to a steering specialist and get it done right
I got a wheel alignment machine at work (Appentice mechanic) i just don't know how far i got to shim the top arm to fix my camber thats why i ask how far people have shimmed, to see if im able to do it without buying the kit
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| joolz |
|
|||
|
Lowered mine with Dobinson lows and used all the shims except far a 1.5mm shim. I would just spend the $120 and put in a kit as im sure 1 of your tyres would cost more than that.
|
|||
| Top | |
|||
| EB92 |
|
|||
|
Regardless of tyre wear, the camber kit will get
the front set right and thus it will handle properly and safely. The advice I had regarding camber kits was... For Lows: Get one anyway For S'Lows: Definately get one |
|||
| Top | |
|||
| t66_bt1 |
|
|||
|
CAMBER KITS ARE S**T!!! they put all the stress on one or two wheel nuts and caused my cousin to lose a wheel at 100kph coming on to a freeway!
_________________ R.I.P George.D.Gogas!!!
|
|||
| Top | |
|||
| stockstandard |
|
|||
|
{USERNAME} wrote: CAMBER KITS ARE S**T!!! they put all the stress on one or two wheel nuts and caused my cousin to lose a wheel at 100kph coming on to a freeway!
ROFL Love to hear the logic behind that one.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| joolz |
|
|||
|
What was all that about 2 wheel nuts, meant to be 5 isnt there lol. All E series have camber kits otherwise how is the camber/castor set.
|
|||
| Top | |
|||
| xf_xr6 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: CAMBER KITS ARE S**T!!! they put all the stress on one or two wheel nuts and caused my cousin to lose a wheel at 100kph coming on to a freeway! ROFL Love to hear the logic behind that one. Hahahahaaa.... Tool (t66...).... Camber/caster kits are just replacement upper arm brackets with longer threads to accomodate shims to properly adjust the camber / caster. Therefore, every e series falcon has one. Only difference is the length of thread! Tell your cousin to tighten his wheel nuts more! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
