|
easpak91 |
|
|||
|
I was wondering if any one has tried to paint the plastic interior bits in a chrome paint ? If so wot do i need to do this ? Thanksjavascript:emoticon(':twisted:')
Twisted Evil
_________________ WHO EVER SAID "TWOS COMPANY THREES A CROWD" OBVIOUSLY NEVER HAD A THREESOME |
|||
Top | |
nlbxr6 |
|
|||
|
I only know of one true chrome looking paint and you need to be fairly confident to use it if your talking about spray cans it doesnt end up looking like chrome
_________________ efII wgn xr front xr ecu 17s filter pacemakers highflow cat & 2.5 manual conversion
|
|||
Top | |
SnyperEB |
|
||
|
Chrome really doesnt look that good in the interior and the can stuff never works properly!
_________________ CVE Performance - Drive In........ Drift Away. |
||
Top | |
stomper |
|
|||
|
i did my own chrome door handles. I stuffed them up because i touched them early. But if you clear coat them they should be right.
Be careful when doing this because its hard to paint with. You have to put a think coat on BUT it runs if you put too much on so take your time. Another tip is to prime it before you start. So Sand Clean (thinners or metho) Prime Sand Prime Coat Sand Coat Clear Coat Doing it this way would make it look tops. Take a look at my thread. http://fordmods.com/forums/viewtopic.php?t=41097
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
Top | |
easpak91 |
|
|||
|
Hey stomper thanks for the tip , wot paint did you use ,ie brand etc ??
_________________ WHO EVER SAID "TWOS COMPANY THREES A CROWD" OBVIOUSLY NEVER HAD A THREESOME |
|||
Top | |
stomper |
|
|||
|
i used the septone paint. I would like to try the VHT brand out but being 17 there are certain places i can buy spray paint by my self.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 66 guests |