|
| Falcon96kickass |
|
||
|
Did this wicked mod
the Door Handle Lights with Blue LEDs pretty Bright but the 2 Back doors keep blowing up any help please
_________________ Your all a bunch of f**k Heads delete this f**k account stupid useless C*** who run this site cant even sell something useless wankers |
||
| Top | |
||
| Tocchi |
|
|||
|
use resistors before the leds to lower the current. that should stop them blowing.
i dont know what volts/amps you are running so i cant give you an exact resistor ohms value |
|||
| Top | |
|||
| Falcon96kickass |
|
||
|
Yeah have done that
cheers anyway
_________________ Your all a bunch of f**k Heads delete this f**k account stupid useless C*** who run this site cant even sell something useless wankers |
||
| Top | |
||
| stockstandard |
|
|||
|
I know its hard, but try to post in the right section
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| Tocchi |
|
|||
|
Falcon96kickass wrote: Yeah have done that
cheers anyway then just chuck a higher value resistor in it. what value are you running at the moment? |
|||
| Top | |
|||
| mr_sperm1 |
|
|||
|
Falcon96kickass wrote: the 2 Back doors keep blowing up
check your wiring to make sure there's nothing shorting out 
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| Whiteknight1 |
|
|||
|
Lucky you've got mr ex Jaycar here, ok, depending on what values your LED is, the formula is as follows,
R= (VS-VL) / I What does that mean? ok R is the value of your resistor required in ohms VS is supply voltage, as in your battery VL is the nominal voltage that your LED requires I is the required current for the LED only thing to note, for the optimum brightness, measure the voltage at the point where you want to place the LED, as the car's electrical system is 13.8 or so, give or take your 2 metres of cable, and i dont imagine they would be very thick, there will be abit of voltage drop, goodluck man, oh, show us piccys too, cya 
_________________ Back in an E series! |
|||
| Top | |
|||
| fordjared |
|
||
|
yeah i must emit. it looks mad. I did mine with red
|
||
| Top | |
||
| shannonwulff |
|
|||
|
stockstandard wrote: I know its hard, but try to post in the right section
hahahahhahaha touche
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| kapul |
|
|||
|
Whiteknight1 wrote: Lucky you've got mr ex Jaycar here, ok, depending on what values your LED is, the formula is as follows,
R= (VS-VL) / I What does that mean? ok R is the value of your resistor required in ohms VS is supply voltage, as in your battery VL is the nominal voltage that your LED requires I is the required current for the LED only thing to note, for the optimum brightness, measure the voltage at the point where you want to place the LED, as the car's electrical system is 13.8 or so, give or take your 2 metres of cable, and i dont imagine they would be very thick, there will be abit of voltage drop, goodluck man, oh, show us piccys too, cya I thought VL = s**t type of commohore 
_________________ Fact: Chuck Norris is so fast he can run around the world and hit himself in the back of the head
|
|||
| Top | |
|||
| Falcon96kickass |
|
||
|
yes it still is aswell
_________________ Your all a bunch of f**k Heads delete this f**k account stupid useless C*** who run this site cant even sell something useless wankers |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 53 guests |
