|
| Subaru |
|
||
|
Hey all, i was reading up on removing the factory deck in the EF/EL series falcons, and im wondering, can i get a TORX driver in a local hardware store, or because its a security thing do i have to outsource it? Basically, where do i get it, which one do i need (apparently there are 2 or 3 types) and roughly how much do they cost.
Also, while im at it, can anybody tell me how to mix and match sound system components, like if i want certain speakers, what amp do i pick? Cheers fellas. Cameron. |
||
| Top | |
||
| horis |
|
|||
|
hey if memory serves me right its a t15 torx bit they are available from most good automotive and tool stores they usally come in a set that you use with a 3/8 drive ratchet or in allen key style as for mix and matchin it all depends on what your after spl(sound perfomance level db)or sql(sound quality level clarity / clearness) what you would want to combine both is a good headdeck ,good set of 6.5 inch splits for the front good set of 6.5 for the rear and 1 or 2 good subs combined with right amp you will be laughin
 hope that helps  
_________________ 95 ef montfor sale pm for info, 88 hilux mud truck |
|||
| Top | |
|||
| Subaru |
|
||
|
OK, ill have a squizz at repco and SuperCheap to see what i can find
What i was thinking, was pioneer deck, 2x6" front, 2 6x9 Rear, 1 Sub and whatever amp i needed (was looking at a 360W). Is it enough to just replace stock parts if im just looking for that extra quality? Student budget here so yeh
|
||
| Top | |
||
| twase |
|
|||
|
Subaru wrote: Hey all, i was reading up on removing the factory deck in the EF/EL series falcons, and im wondering, can i get a TORX driver in a local hardware store, or because its a security thing do i have to outsource it? Basically, where do i get it, which one do i need (apparently there are 2 or 3 types) and roughly how much do they cost. Get a small flat bladed screw driver and break off the pin that makes it a secure torx by bending it one way then the next , then use a normal torx to undo it.
Also, while im at it, can anybody tell me how to mix and match sound system components, like if i want certain speakers, what amp do i pick? Cheers fellas. Cameron.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| smiley235 |
|
|||
|
I got my set at repco.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| horis |
|
|||
|
yeah subaru that would do alright just make sure you dont buy crap gear i did an install into my girlfriends sisters car comprissin of that and it goes alright its just got sony headeck and speakers runnin of the head deck and a boss 2 channel amp runnin a 10'' jensen sub and for the $400 she paid all up it would give some better systems a run for their money
_________________ 95 ef montfor sale pm for info, 88 hilux mud truck |
|||
| Top | |
|||
| insensate |
|
||
|
i paid 20 bucks for a full set.. pretty good quality too..
|
||
| Top | |
||
| Big Kev |
|
|||
|
Most auto/hardware stores will have them....got one from Bunnings not long ago...
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| OBS35N |
|
|||
|
Subaru wrote: OK, ill have a squizz at repco and SuperCheap to see what i can find
What i was thinking, was pioneer deck, 2x6" front, 2 6x9 Rear, 1 Sub and whatever amp i needed (was looking at a 360W). Is it enough to just replace stock parts if im just looking for that extra quality? Student budget here so yeh forget the 6x9's and get 6" in the back and a set of cheap splits up front. are you looking for sq or spl?
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| joolz |
|
|||
|
You can get the full set of security bits from D ick Smith for around $15-20. I wouldnt bother with the 6x9's in the rear as its alot of work for no real benefit if you are going to install a sub.
|
|||
| Top | |
|||
| shannonwulff |
|
|||
|
head to bunnings, i got mine for $12, had the torx bits and some other star-like ones...not sure about those
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| Falcon-enthusiast |
|
|||
|
i remember when i took mine out, i fkd up the whole screw and ended up using long nose pliars to get the screws out, not making the same mistake again hehe
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
