Fordmods Logo

Wiring up splits 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: Wiring up splits
Posted: Sat Jan 13, 2007 4:28 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Hi,

I was just wondering what the easiest way would be to wire up a set of splits up front with a crossover.
I am going to have the amp under the front passenger seat, and possibly the crossovers under there too.

I was wondering on where easy locations to pick up on the door speaker wire, and also the tweeter wire would be?

I'm assuming that the speaker wire coming from the doors is fairly easy to get too, and if I cut that - the wires from behind the head unit should be OK for the tweeter???

Any help much appreciated.

Cheers,
Dave.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Sat Jan 13, 2007 4:47 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

This is how my lazy a** did it:

Speaker line from amp (under drivers seat) through centre console to behind headunit connected to original factory wire, from factory wire in door to the cross over, which I mounted in the big cavity behind where the glass sits when you wind the window down (I just made a bracket), wire from crossover to woofer, left excess so that it hangs and doesn't get pushed when wind the window down, and wire up to the sails where I mounted the tweeters.
Only thing I'd really change is replacing the factory speaker wire, but as I said, I'm lazy.
Top
 Profile  
 
 
Posted: Sat Jan 13, 2007 11:58 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 3097

Joined: 5th Nov 2004

Gallery: 29 images

Ride: VU SS

Location: Ivanhoe
NSW, Australia

Cool, cheers twr.
What splits/amp have you got?
Also, do you have any problems with the amp under the seat?

Cheers,
Dave.

 

_________________

EF Fairmont now Sold!
Guides: Polishing|Modifications |Manual Conversion

Top
 Profile  
 
 
Posted: Sun Jan 14, 2007 12:48 am 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

you not re running your own cable?

i got my amp under the seat with new wire running up behind the dash to the crossover, then a new wire through the door.

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sun Jan 14, 2007 8:44 am 
Oompa Loompa
Offline

Age: 53

Posts: 46

Joined: 5th Sep 2005

Ride: Falcon

Location: Melbourne
VIC, Australia

I have done mine the same as twr.
I have a amp under both front seats, the one under the drivers seat running the splits up front, (MB Quart), and rear shelf, (Alpine). The amp under the passenger seat runs 2 12" subs in the boot.

The wiring for the splits runs from the amp up under the centre console to behind the head unit and connects up with the factory wiring. I have mounted the MB Quart x-over onto each door behind the arm rest on the door trim, (it has a big cavity under there). The factory wiring runs to the x-over, then i run the wiring from the x-over to the woofer and the tweeter, (which is mounted on the door sails above the mirror controls.)
Hope this helps.

 

_________________

Cheers.

Top
 Profile  
 
 
Posted: Sun Jan 14, 2007 6:25 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

voxace wrote:
Cool, cheers twr.
What splits/amp have you got?
Also, do you have any problems with the amp under the seat?

Cheers,
Dave.


I've had about 5 different amps located under each of the seats over the last few years and never had an issue at all!
At the moment I'm running Clarion tweeters, Alpine (DDDrive or some s**t like that) mid bass drivers, Alpine cross over box, and Philips DAP3020 2-channel amplifier. Nothing overly special.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 7:41 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names