|
| Busso |
|
|||
|
hey my mate is wrecking a EL 6 and wants to know the easiest way to get the starter motor off because he wants to put it on his EB II as his starter motor is on the way out. any help guys cheers
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| nick81xd |
|
||
|
13mm ratchet spanner from underneath and alot of patience. bout the only way
|
||
| Top | |
||
| nannas_ed |
|
|||
|
nick81xd wrote: 13mm ratchet spanner from underneath and alot of patience. bout the only way
13mm 1/4 drive ratchet from under neath is easier 
_________________
|
|||
| Top | |
|||
| Busso |
|
|||
|
ok cheers guys
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| haggis |
|
|||
|
You could also remove the airbox and feed a couple of extensions in under the intake. I would only do it this way if you have someone under the car who can guide the socket on though.
_________________ I can see through wooden doors. |
|||
| Top | |
|||
| TwistedEL |
|
|||
|
You can get it from underneath but if he is wrecking it anyway you might as well just take the BBM off then it is piss easy
|
|||
| Top | |
|||
| Busso |
|
|||
|
yer said he's not ready to pull the engine bay apart yet but i'll let him know
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 92 guests |
