Bosch fuel injector - what rate?

Home » Forums » Fordmods Tech » V8 Workshop

Page 1 of 1 [ 10 posts ]

Post New Topic Post Reply

Previous topic Next topic

Vic

Post subject: Bosch fuel injector - what rate?

Posted: Tue Jan 16, 2007 8:42 pm

Getting Side Ways

Offline

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

I haven't had any luck tracking down the specs on the following Bosch fuel injector part number: 0280 155 903.

Can someone point me in the right direction of a Bosch spec chart?

_________________

5.6L of carbon footprint.

Top

Profile

xr8ute

Posted: Tue Jan 16, 2007 9:04 pm

Getting Side Ways

Offline

Age: 44

Posts: 661

Joined: 2nd Dec 2004

Ride: AU XR8

Location: Wollongong
NSW, Australia

What specs are you after? That is the part number of the std injectors fitted on (almost) all AU V8's.

Its an EV6 injector with a USCAR connector......fuel flow rated at 24lbs/hr at 39psi rail pressure.

Top

Profile

Vic

Posted: Tue Jan 16, 2007 9:30 pm

Getting Side Ways

Offline

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Yes, flow rate was what I was after, thanks!
How do they compare with the FMS #24lb bluetops in terms of fuel pressure?

_________________

5.6L of carbon footprint.

Top

Profile

EBXR8380

Posted: Tue Jan 16, 2007 11:30 pm

Getting Side Ways

Offline

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Power / flow wise ?? About the same.. The Ev 6 atomize better.. Or so they say...

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top

Profile

xr8ute

Posted: Tue Jan 16, 2007 11:59 pm

Getting Side Ways

Offline

Age: 44

Posts: 661

Joined: 2nd Dec 2004

Ride: AU XR8

Location: Wollongong
NSW, Australia

Yep, fuel flow on those is rated at thesame rail pressure as the FMS 24lb EV1's....39psi.

Top

Profile

4.9 EF Futura

Posted: Wed Jan 17, 2007 9:24 am

Getting Side Ways

Offline

Age: 43

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

Unfortunately this chart is missing a few... including the one you're chasing i think vic...

But for what it's worth (impress your friends! lol)...

http://carsoft.co.il/page3/Electronic%2 ... jector(EFI)%20Flow%20Data%20Table.htm

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top

Profile

Vic

Posted: Wed Jan 17, 2007 10:12 am

Getting Side Ways

Offline

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

Not bad Martin, thanks.

_________________

5.6L of carbon footprint.

Top

Profile

4.9 EF Futura

Posted: Wed Jan 17, 2007 10:13 am

Getting Side Ways

Offline

Age: 43

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

BTW Im sure you're all capable of fixing up my dodgy link lol

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top

Profile

kato

Posted: Wed Jan 17, 2007 10:56 am

Stock as a Rock

Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

I had similar dramas when I put them in my EF, was told they were 24lb, after fitting them and a C&L maf with 24lb sample tube the car ran super lean, took to local dyno the AFR was 17:1 , fitted my original maf and car ran fine again?? I phoned bpt and they were surprised to tell me that they were not 24's?? Can only speak from my experience though.

_________________

EF XR8 5spd: 302ci /178rwkw

Top

Profile

xr8ute

Posted: Wed Jan 17, 2007 8:27 pm

Getting Side Ways

Offline

Age: 44

Posts: 661

Joined: 2nd Dec 2004

Ride: AU XR8

Location: Wollongong
NSW, Australia

{USERNAME} wrote:

I had similar dramas when I put them in my EF, was told they were 24lb, after fitting them and a C&L maf

C&L MAF......say no more.

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 10 posts ]

Jump to:

Home » Forums » Fordmods Tech » V8 Workshop

Who is online
Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Thu Dec 26, 2024 6:47 am

All times are UTC + 11 hours